Related Manuals for Sharp Aquos LC-32A47E
Summary of Contents for Sharp Aquos LC-32A47E
- Page 1 LC-32A47E LCD COLOUR TELEVISION LCD-FARBFERNSEHGERÄT OPERATION MANUAL BEDIENUNGSANLEITUNG...
- Page 2 SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
-
Page 3: Table Of Contents
The “HD ready” Logo is a trademark of EICTA. Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. -
Page 4: Important Safety Precautions
Important Safety Precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement. -
Page 5: Tv (Rear View)
Mounting the TV on a wall • This TV should be mounted on a wall only with the wall mount bracket available from SHARP (Page 15). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. -
Page 6: Remote Control Unit
Quick guide Remote control unit B (Standby/On) AV MODE Select a video setting (Page 8). Enter standby mode or turn on the power (Page 5). e (Mute) p (Display information) Switch the sound on and off. (Page 13) ik/l (Volume) 2 (Sound mode) ik Increase the volume. -
Page 7: Turning On The Power
Quick guide After this setting, auto search starts with the following Turning on the power order: Programme auto search Press a on the TV or B on the remote control unit. Auto labelling Standby mode Auto sorting Press B on the remote control unit when the TV is on. Preset download •... -
Page 8: Using External Equipment
Using external equipment Setting the input source To view external source images, select the input source using b on the remote control unit or the TV. Equipment Cable Terminals SCART cable* EXT3 Decoder HDMI-DVI conversion adapter/cable* EXT1 EXT6 ø 3.5 mm stereo minijack cable* DVD player HDMI-certified cable* EXT1... -
Page 9: Menu Operations
Menu operations What is the MENU? • You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “MENU”. • The “MENU” enables various settings and adjustments. • The “MENU” can be operated with the remote control unit. Common operations Display the MENU Select an item... -
Page 10: Picture Menu
Menu operations Picture menu Colour Temp. Adjusts the colour temperature to give the best white AV Mode image. Item “AV Mode” gives you several viewing options to choose from to best match the system environment, which High: White with bluish tone. can vary due to factors like room-brightness, type of Mid-High: Intermediate tone between “High”... -
Page 11: Power Control Menu
Menu operations Go to “MENU” > “Setup” > Power Control menu “Programme Setup”. If you have already set the PIN under No Signal Off “Child Lock”, enter it here. When set to “Enable”, the TV will automatically enter • See page 10 for setting PIN. standby mode if there is no signal input for 15 minutes. -
Page 12: Child Lock
Menu operations Colour sys. Select the optimum colour systems to receive (“AUTO”, Erase Programme “PAL”, “SECAM”). Channels can be erased individually. Sound sys. (Broadcasting system) Repeat steps 1 and 2 in Programme Select the optimum sound systems (Broadcasting Setup. systems) to receive (“B/G”, “D/K”, “I”). Press c/d to select “Yes”, and then Label When a TV channel sends its Network Name, the “Auto... -
Page 13: Input Label
Menu operations Input Label HDMI Setup You can label each input source with a custom HDMI (High-Definition Multimedia Interface) terminal description. selection. Press b to select the desired input To watch an HDMI equipment image, source. select “EXT1” or “EXT2” (the terminal which you are using) from “INPUT Go to “MENU”... -
Page 14: Option Menu
Menu operations XGA Mode DNR (Digital Noise Reduction) You can select one of the three input signals listed below Produces a clearer image (“Off”, “High”, “Low”). to adjust the picture resolution when the PC input is an XGA signal. Input Select For setting the signal type of external equipment. -
Page 15: Freezing The Image While Watching
Useful features Time display Freezing the image while watching You can display the time information included in the Teletext broadcasts. Allows you to capture and freeze one frame from a Select a TV channel providing Teletext moving image that you are watching. information (The time information is Press Z. -
Page 16: Appendix
Appendix Troubleshooting Problem Possible Solution Check if you pressed B on the remote control unit (Page 5). • No power. • If the indicator on the TV lights up red, press B. • Is the AC cord disconnected? (Page 3) Check if you pressed a on the TV (Page 5). -
Page 17: Specifications
Operating temperature • As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. -
Page 18: End Of Life Disposal
If the product is used for business purposes and you want to discard it: Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities. - Page 19 390.0 390,0 66.2 123.5 66,2 123,5 699.2 699,2 235.0 200.0 235,0 200,0...
-
Page 20: Sharp Corporation
SHARP ELECTRÓNICA ESPAÑA S.A. Polígono Industrial Can Sant Joan Calle Sena s/n 08174 SANT CUGAT DEL VALLÉS BARCELONA (ESPAÑA) SHARP CORPORATION Printed in Spain Gedruckt in Spanien TINS-E207WJZZ 09P04-SP-NG...