Table of Contents
Advertisement
INSTRUMENT AND CONTROL FUNCTIONS
3
1. Windshield
2. Bolt (× 4)
Windshield
[XV16AT(C)/XV16ATLE(C)]
To suit the rider's preference, the wind-
shield angle can be adjusted and the
height can be changed to one of two
positions.
To adjust the windshield angle
1. Loosen the bolts on each side of
the windshield.
2. Move the windshield to the desired
angle.
3. Tighten the bolts to the specified
torque.
1. Headlight cover
2. Screw (× 4)
To change the windshield height
EAU01231
1. Remove the bolts on each side of
the windshield.
2. Move the windshield to the other
position.
3. Install the bolts and tighten them
to the specified torque.
Tightening torque:
Windshield bolts:
12 ft·lbf (1.6 m·kgf, 16 Nm)
4. Loosen the screws holding the
3-13
windshield cover located above the
headlight, position the cover close
to the headlight without touching it,
and then tighten the screws.
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
