Table of Contents
Advertisement
Front View with Front Bezel Removed
Hot-plug 3.5-inch hard disk drive model (SATA or SAS)
See 3 - 7 on the previous page.
2
3
1
8-0
Hot-plug 2.5-inch hard disk drive model (SAS)
See 3 - 7 on the previous page.
2
3
1
1
Handles (1 at the right and left each)
Hold the handles when dismounting/mounting the server from/in the rack.
2
Serial port B (COM B) connector
Management port fro connecting the personal computer having a serial interface to this
connector.
3
USB connectors (2 ports)
Connect device compliant with the USB interface to the connectors.
4
DUMP (NMI) switch
Press this switch to dump system memory.
5
POWER switch
Press this switch to turn on/off the power. Pressing the switch once turns on the power, and
the POWER LED goes on. Pressing it again turns off the power. Keep pressing the switch for
4 seconds or more forcibly turns off the power.
6
UID (Unit ID) switch
Press this switch to turn on/off the UID LEDs on the front and rear panels of the server.
Pressing the switch once turns on the LEDs. Pressing it again turns them off.
7
Optical disk drive (DVD-ROM drive)
This drive reads data from the disc.
7-1 Emergency hole
8
Hard disk drive bays
Mount hard disk drives in the bays. Each number following the bold-faced number indicates
the drive ID. The hard disk drives must be purchased separately.
9
DISK LED (green/amber)
Hard disk drive LED. Each hard disk drive LED is green during access to the hard disk drive.
The LED turns amber when the hard disk drive fails. The LED flashes switching back and forth
between green and amber during build processing (in only disk array configuration).
4
5
6
9
4
5
6
7-1
7-2 7-3
7-2 Disk access LED
7-1
7-2 7-3
8-1
8-0
8-2
8-1
8-3
General Description 2-5
8-2
8-4
8-5
7-3 CD tray eject button
1
1
9
Advertisement
Table of Contents
Troubleshooting
