Table of Contents
Advertisement
STANDARD FEATURES
High performance
Intel Xeon processor
High-speed network interface
(1000Mbps/100Mbps/10Mbps supported)
High-speed disk access
(Ultra320 SCSI or SATA)
High-speed memory access (168-pin, 72-
bit ECC registered DDR DIMM (DDR333
compatible)
High-reliability
Memory monitoring feature (single-bit
error correction/multiple-bit error
detection)
CPU/memory degradation feature (logical
isolation of a failed device)
Memory chip kill
Bus parity error detection
Temperature detection
Error notification
Internal fan monitoring feature
Internal voltage monitoring feature
Auto-rebuild feature (optional, hot-
swappable)
BIOS password feature
Mechanical security lock
Onboard RAID controller
Redundant fans
Redundant power supply
Remote Management Card (RMC),
option
Management Utilities
NEC ESMPRO
NEC DianaScope
Maintenance Features
Off-line Maintenance Utility
Memory dump feature using the DUMP
switch
*1 SCSI hot-plug hard disk drive model
*2 SATA fixed hard disk drive model
General Description 2-15
Expandability
One 64-bit/133MHz PCI-X and one 64-
bit/66MHz PCI-X
Large memory of up to 12 GB
Three hot-swap SCSI hard disk drive
bays
*1
Up to two multi-processors are available
for upgrade.
USB interface (A USB-support driver is
required.)
Two network ports
Many Available Features
Graphic accelerator "RADEON 7000"
support
El Torito Bootable CD-ROM (no
emulation mode) format support
POWER switch mask
Software power-off
Remote power-on feature
AC-Link feature
Consoleless feature
Self-diagnosis
Power On Self-Test (POST)
Test and Diagnosis (T&D)
Easy and Fine Setup
NEC EXPRESSBUILDER (system setup
utility)
Configuration Parameter Diskette Creator
SETUP (BIOS setup utility)
SCSISelect (SCSI device RAID
*1
configuration
Array configuration
utility)
*2
Advertisement
Table of Contents
Troubleshooting
