Table of Contents
Advertisement
Temperature display
The temperature display can indicate several pieces of information.
• During normal operation, the temperature currently present in the freezer
(ACTUAL temperature) is displayed.
• When the temperature is being adjusted a flashing display indicates the
freezer temperature currently set (DESIRED temperature).
Starting Up - Setting the Temperature
1.
Plug the mains plug into the mains socket.
2.
If the display is OFF, press ON/OFF button. The alarm light flashes and the
buzzer sounds.
3.
Press the "I" button to stop the buzzer, the light still flashes since the
temperatur is reached.
4.
Press either the „B" or „D" button. The temperature display switches over
and the DESIRED temperature currently set flashes on the temperature
display.
5.
Set the required temperature by pressing the „B" or „D" buttons (see section
"Temperature setting buttons"). The temperature display will immediately
show the changed setting. Each time the button is pressed the temperature
is adjusted by 1 °C.
From a food safety point of view -18 °C should be considered sufficiently
cold for storing food in the freezer.
FROSTMATIC
The FROSTMATIC function accelerates the freezing of fresh food and, at the
same time, protects foodstuffs already stored from undesirable warming.
1.
The FROSTMATIC function is switched on by pressing the FROSTMATIC
button. The yellow light illuminates.
If the FROSTMATIC function is not ended manually, the appliance electro-
nics switch off the FROSTMATIC function after 52 hours. The yellow light
goes out.
2.
The FROSTMATIC function can be ended manually at any time by pressing
the FROSTMATIC button again. The yellow light goes out.
72
Advertisement
Table of Contents
