Switching On The Casserole Zone; Residual Heat Indicator - AEG 6130 M Operating And Installation Manual

Glass ceramic cooking surface

Hide thumbs Also See for 6130 M:

Table of Contents

Operating Instructions

Switching on the Casserole Zone

Depending on the size of the pan, on the casserole zone the larger ring

can be switched on, in addition to the smaller cooking zone, using the

touch switch on the glass ceramic cooking surface.

1. Switch on cooking zone in the

normal way using the ring switch.

– The small ring is switched on.

2. Tap the corresponding touch

switch on the cooking surface.

– The larger ring is also switched

on. The touch switch indicator

illuminates.

3. To switch off the larger ring, tap

the touch switch again.

If the casserole zone is completely

switched off using the ring switch,

the larger ring must be switched

on again, if needed, the next time the zone is switched on.

An indicator is assigned to each cooking zone. This illuminates as soon

as the corresponding cooking zone becomes hot and warns against

inadvertent touching.

Important! As long as the residual heat indicator is illuminated, there is

a risk of burns.

Even after the cooking zone is switched off, the corresponding residual

heat indicator will remain on until the cooking zone is cold.

You can use the residual heat for melting and keeping food warm.

Table of Contents

Show Quick Links

Table of Contents