Metal Décor Strips; What To Do If - AEG 66300 K-IN Installation And Operating Instructions Manual
Ceramic glass hob
Hide thumbs
Also See for 66300 K-IN:
- Installation and operating instructions manual (40 pages) ,
- Installation and operating instructions manual (96 pages)
Table of Contents
Advertisement
Metal décor strips
1
Warning! Do not use vinegar, lemon juice or lime slaking agents on the
cooking surface's décor strips, otherwise dull spots will result.
When cleaning do not introduce flat objects (e.g. knives) under the dé-
cor strips, as otherwise these can possibly become detached.
1. Wipe metal décor strips with a damp cloth and a little washing up liq-
uid.
2. Soak dried on spillages with a wet cloth. Afterwards wipe off and rub
dry.
What to do if ...
The cooking zones will not
switch on or are not func-
tioning
Acoustic signal sounds
when appliance is switched
off
The residual heat indicator
is not displaying anything
20
Problem
More than 10 seconds have
passed since the appliance
was switched on
The child safety device is
switched on
Several sensor fields were
touched at the same time
Safety cut-out has been
triggered
The lock is switched on l
The control panel is wholly
or partly covered by ob-
jects.
The cooking zone was only
on for a short time and is
therefore not hot
Possible cause
l
Remedy
Switch the appliance on
again.
Deactivate the child safety
device (See the section
"Child safety device")
Only touch one sensor field
Remove any objects (pan,
cloths, etc.) that are lying
on the control panel.
Switch the appliance on
again
Switch off the lock (See
the section "Locking/un-
locking the control panel")
Remove objects.
If the cooking zone is sup-
posed to be hot, call the
Customer Service Depart-
ment.
- Quick Links:
- Installation Instructions
Hide quick links:
Advertisement
Table of Contents
