Table of Contents
Advertisement
Quick Links
Model No.
Model No.
Model No.
■
This manual explains the network operation of the projector.
For information other than the network operation, such as the usage, inspection and
replacement of parts, see "Operating Instructions - Functional Manual".
M1010KT0 -FJ
Operating Instructions
Network Operation Manual
DLP
Based Projector
™
PT-DZ570E/PT-DZ570U
PT-DW530E/PT-DW530U
PT-DX500E/PT-DX500U
Commercial Use
TQBJ0353(E)
Advertisement
Table of Contents
Related Manuals for Panasonic PT-DZ570E
Summary of Contents for Panasonic PT-DZ570E
-
Page 1: Operating Instructions
Operating Instructions Network Operation Manual Commercial Use Based Projector ™ PT-DZ570E/PT-DZ570U Model No. PT-DW530E/PT-DW530U Model No. PT-DX500E/PT-DX500U Model No. ■ This manual explains the network operation of the projector. For information other than the network operation, such as the usage, inspection and replacement of parts, see “Operating Instructions - Functional Manual”. -
Page 2: Table Of Contents
Contents Request Regarding Security · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·3 What you can do ·... -
Page 3: Request Regarding Security
Please contact Panasonic if you need help taking care of security settings or other such. If you cannot perform security settings for your wireless LAN by yourself, please contact the Panasonic Support Center. Panasonic asks customers to thoroughly understand the risk of using this product without making security settings, and... -
Page 4: What You Can
What you can do ＜WEB control＞ （See page 21） The following operations are possible when using WebBrowser. ・ Setting and adjusting the projector ・ Displaying the projector status ・ Setting for message transmission ＜PJLink＞ （See page 37） Compatible with PJLink Class 1. The following operations can be performed from a computer when PJLink protocol is used. -
Page 5: Notes On Using Wireless Connection
Notes on Using Wireless Connection Wireless connection function of the projector uses radio waves in the 2.4 GHz band. A radio station license is not required, but be sure to read and fully understand the following items before use. The wireless module (part number: ET-WM200E/ET-WM200U) sold separately needs to be mounted when using the wireless LAN function with the projector. - Page 6 Notes on Using Wireless Connection (continued) ■ Wired LAN Use straight or crossover LAN cable that is compatible with category 5 or above. Whether straight cable, crossover cable or both can be used varies depending on the system configuration. For details, consult your system administrator.
-
Page 7: Check Your Computer
Check your computer Necessary environment for computers to be connected ・ First, check your computer to see whether or not it has a wired LAN or a built-in wireless LAN function. “Glossary” ( See page 40 – 41) ・ Before connecting the projector to the computer, be sure to check the following settings. ・... -
Page 8: Network Menu
NETWORK menu ■ PROJECTOR NAME→ See page 10 You can change the name of the projector. ■ WIRED LAN→ See page 11 You can make detailed wired LAN settings. ■ WIRELESS LAN → See page 12 You can make detailed wireless LAN settings. ■... -
Page 9: Displaying The Network Menu
NETWORK menu (continued) When making a connection between a computer and a projector with settings other than the default settings, perform the procedure below to display the menu required when changing the initial settings. Displaying the NETWORK menu Press the <MENU> button on the projector. The main menu appears. -
Page 10: Projector Name
NETWORK menu (continued) PROJECTOR NAME You can change the projector name to be displayed on the network. Select [PROJECTOR NAME] in the NETWORK menu NETWORK PROJECTOR NAME NAME1234 and press the <ENTER> button. WIRED LAN WIRELESS LAN USER1 NETWORK CONTROL NETWORK PASSWORD NETWORK PASSWORD CHANGE LIVE MODE CUT IN... -
Page 11: Wired Lan
NETWORK menu (continued) WIRED LAN You can make detailed wired LAN settings. Press ▲ ▼ to select [WIRED LAN], and press <ENTER> button. The [WIRED LAN] screen will be displayed. NETWORK PROJECTOR NAME NAME1234 WIRED LAN WIRELESS LAN USER1 NETWORK CONTROL NETWORK PASSWORD NETWORK PASSWORD CHANGE LIVE MODE CUT IN... -
Page 12: Wireless Lan
NETWORK menu (continued) WIRELESS LAN You can make detailed wireless LAN settings. You can configure settings when the wireless module (ET-WM200E/ET-WM200U) is mounted. Setting network number Select [WIRELESS LAN] with the ▲ ▼ buttons. Select the number to be connected with the ◄► buttons. NETWORK PROJECTOR NAME NAME1234... - Page 13 Select [NEXT] on the [WIRELESS LAN] screen (1/2) to switch to the [WIRELESS LAN] configuration screen (2/2). Make the settings related to the wireless connection between the projector and the network. Select [CANCEL] instead of [NEXT] to cancel the configuration change. WIRELESS LAN SSID Panasonic Projector MODE AD HOC AUTHENTICATION OPEN...
- Page 14 NETWORK menu (continued) ● ：Set the user authentication method used by the network to be connected. AUTHENTICATION ：Select when making a connection using [AD HOC], or when the access point OPEN authentication method is OpenSystem ：Select when making a connection using [AD HOC], or when the access point SHARED authentication method is Shared Key ：Select when the access point authentication method is WPA-PSK...
-
Page 15: Network Control
NETWORK menu (continued) ■ Default settings of [USER1] - [USER3] The following settings as [USER1] - [USER3] in the wireless LAN are set before the projector leaves the factory. SSID Panasonic Projector DHCP IP ADDRESS 192.168.11.100 SUBNET MASK 255.255.255.0 DEFAULT GATEWAY 192.168.11.1... -
Page 16: Network Password
NETWORK menu (continued) NETWORK PASSWORD Use this if you want to restrict the connection by setting the password when connecting with the projector using the “Wireless Manager mobile edition 5.5”. Set to [ON] if you want to perform the password check when connecting to the network. (Default : [OFF]) Select [NETWORK PASSWORD] at the network menu. -
Page 17: Live Mode Cut
NETWORK menu (continued) LIVE MODE CUT IN Set this to [ON] if you allow another user in the live mode to cut in while you are in the live mode (sending the screen images) using the “Wireless Manager mobile edition 5.5”. See the “Wireless Manager mobile edition 5.5” operation manual for details. -
Page 18: Network Status
NETWORK menu (continued) NETWORK STATUS Displays the current network status. Press ▲ ▼ to select [NETWORK STATUS], and press <ENTER> button. Switch between the wired LAN screen and the wireless LAN screen with ◄► buttons. NETWORK PROJECTOR NAME NAME1234 WIRED LAN WIRELESS LAN USER1 NETWORK CONTROL... -
Page 19: Connecting With Wired Lan
You cannot set “any” or “ANY” for SSID. ・ The following settings are set before the projector leaves the factory. DHCP IP ADDRESS 192.168.11.100 SUBNET MASK 255.255.255.0 DEFAULT GATEWAY 192.168.11.1 SSID Panasonic Projector MODE AD HOC AUTHENTICATION OPEN ENCRYPTION NONE CHANNEL... -
Page 20: Computer Operation
[SSID] set with the projector, and then click [Connect If the projector setting is the factory setting, then [SSID] is [Panasonic Projector]. The names are for Windows XP. In Windows Vista/Windows 7, the procedure will be [Start]→[Connect To]. -
Page 21: Using Web Browser
Enter the IP address set by the projector into the URL input field of the Web browser. Enter your “User name” and “Password”. The factory default settings are user1 (user privileges) or admin1 (administrator privileges) for the use name and panasonic (lowercase letters) for the password. Click [OK] to display the Projector status page. Note ・... - Page 22 Using Web Browser (continued) Projector status page Click [Status], then [Projector status] to display the Status information page. This page displays the projector statuses established for the items shown below. Displays the type of projector. Displays the AROUND LAMP TEMPERATURE. Displays the firmware version of the projector Displays the lamp lit hours.
- Page 23 Using Web Browser (continued) Error information page If [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen, click the part to display the details of the error. ・ Depending on the nature of the error, the projector may be placed in the standby mode for its own protection. Normal operation FAILED:Occurrence of trouble ■...
- Page 24 Using Web Browser (continued) Network status page Displays the current configuration information of the network. Displays the configuration details of wireless LAN. You can configure settings when the wireless module (ET-WM200E/ET-WM200U) is mounted. Displays the configuration details of wired LAN. Access error log page Displays the error log of the WEB server such as access to a page that does not exist, or access with invalid user name or password.
- Page 25 Using Web Browser (continued) Access log page Displays the user name who accessed a WEB control page, the access source IP address, and access time, etc.
- Page 26 Using Web Browser (continued) Basic control page To move from another page, click [Projector control], then [Basic control]. Page selection tabs Detailed set up button Click this item to display the advanced settings Click these to switch pages. page. This displays the on-screen status. It is displayed Change password button even if the on-screen display of the projector is set to off.
- Page 27 Using Web Browser (continued) Detail control page Click [Projector control], then [Detail control] to display the Detail control page. Pressing these buttons controls the projector and This button updates the on-screen description updates the on-screen description on the right of on the right of the control page with the latest the control page when control is finished.
- Page 28 Using Web Browser (continued) Change Password page Click [Change password]. Administrator User ■ Administrator mode Account Current user name input field Current password input field New user name input field New password input field New password input field (re-enter for confirmation) Button for executing password change ■...
- Page 29 Using Web Browser (continued) Network config page You can make detail network settings on projector, when connecting without the administrator authority or when connecting through an access point (infrastructure mode). ■ LAN settings Click [Detailed set up] in the menu. Select the items to change and click [Next].
- Page 30 Using Web Browser (continued) ■ Making the above settings effective (Only for wireless LAN) Select [WIRELESS LAN] in the network menu of the projector, and use the ◄► buttons to select the network set in this page. Note ・ Important video/audio data is protected because AES encryption processing takes place. ・...
- Page 31 Using Web Browser (continued) Adjust clock page Click [Detailed set up], then [Adjust clock] to display the Adjust clock page. Time zone selection When setting the date and time automatically, input the IP address or name of the NTP server. (When inputting the server Button to update time zone setting name, the DNS server must be set.) Turn this [ON] to set the date and...
- Page 32 Using Web Browser (continued) E-mail setup page With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be sent to one or more preset e-mail addresses (maximum two addresses). Click [Detailed set up], then [E-mail set up] to display the E-mail setup page.
- Page 33 Using Web Browser (continued) E-mail setup page (continued) Check these boxes when e-mail is to be sent periodically to the second e-mail address. E-mail will be sent at the times and on the days checked.
- Page 34 Using Web Browser (continued) E-mail setup page (continued) Enter the e-mail address to which the e-mail is to be sent when two e-mail addresses are going to be used. Do not enter it when the second e-mail address is not going to be used. Select the conditions for sending e-mail to the second e-mail address.
- Page 35 Using Web Browser (continued) Authentication set up page The POP/SMTP server is set on this page when POP/SMTP authentication is required for mail transmissions. Click [Detailed set up], then [Authentication set up] to display the Authentication server setup page. Select the authentication method specified by POP/SMTP server password field your Internet service provider.
- Page 36 Using Web Browser (continued) Contents of mail sent ■ Mail with the contents shown below is sent when the e-mail settings have been established. ■ Mail with the contents shown below is sent when an error has occurred.
-
Page 37: Pjlink Protocol
The name set for [PROJECTOR NAME] in [NETWORK SETUP] is NAME ? Projector name query returned. INF1 ? Manufacturer name query “Panasonic” is returned. “DZ570E/DZ570U”, “DX500E/DX500U” or “DW530E/DW530U” is INF2 ? Model name query returned. INF0 ? Other information query Information such as version number is returned. -
Page 38: Control Commands Via Lan
“xxxxxx:yyyyy:zzzzzzzz” xxxxxx : Administrator rights user name for WEB CONTROL (Default user name is “admin1”) yyyyy : Password of above administrator rights user (Default password is “panasonic”) zzzzzzzz : 8-byte random number obtained in Step 2) Command transmission method Transmit using the following command format. -
Page 39: When Web Control Administrator Rights Password Is Not Set (Non-Protect Mode)
Control commands via LAN (continued) When WEB Control administrator rights password is not set (Non-protect mode) Connection method Obtain the IP address and port number (Initial set value = 1024) of the projector and make a request for connection to the projector. You can obtain both IP address and port number from the menu screen of the projector. -
Page 40: Glossary
Glossary Item Descriptions page Access point These are stations for relaying electromagnetic signals between computers in a wireless LAN. When a computer is connected to an access point, it can communicate through the network connected to the access point. AD HOC This is the mode in which computers communicate with each other directly, rather than via access points. -
Page 41: Trademarks
Unauthorized use or reproduction of part or all of this manual is strictly prohibited. ・ Panasonic cannot be held liable for any effects resulting from the use of this manual. ・ Panasonic reserves the right to revise this manual contents without notice. - Page 42 Web Site : http://panasonic.net/avc/projector/ © Panasonic Corporation 2010...