Connecting Speakers - Yamaha RDX-E700 Owner's Manual

Hide thumbs Also See for RDX-E700:

Owner's manual (428 pages)

Service manual (30 pages)

Owner's manual (428 pages)

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

Table of Contents

Available languages

Follow the procedure below to connect speakers to the DVD receiver. Here, the connection example uses the YAMAHA

NX-E700 (consisting of two speakers) and its supplied cables. For information on your speakers, refer to the owner's

manual for the speakers.

You can also use commercially available speakers (see page 8).

Notes

• Do not connect the power cable of the DVD receiver until all cable connections are completed.

• Be sure to connect the left channel (L), right channel (R), "+" (red) and "–" (black) properly. If the connections are faulty, no sound

will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.

• Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could damage the DVD

receiver and/or the speakers.

• Use speakers with the specified impedance shown on the rear panel of this unit.

• Use magnetically shielded speakers. If this type of speakers still creates the interference with the monitor, place the speakers away

from the monitor.

R speaker

Speaker cable

6Ω MIN. /SPEAKER

CLASS 2 WIRING

SPEAKERS