Adjusting The Response Positions Of The Touch Panels (Touch Panel Calibration) - Pioneer AVIC-D3 Operation Manual
Dvd multimedia av navigation server
Hide thumbs
Also See for AVIC-D3:
- Operation manual (263 pages) ,
- Installation manual (54 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
MAN-AVIC-D3-EN.book Page 117 Monday, January 15, 2007 8:51 AM
5
Press the MAP button to change to the
navigation screen.
Some time is needed until navigation is ready.
6
Check the details of the cautionary mes-
sage and touch "OK".
7
To set the time difference, touch "+" or
"–".
The time difference between the time origi-
nally set in the navigation system (Central
European Time) and the current location of
your vehicle is shown. If necessary, adjust the
time difference. Touching "+" or "–" changes
the time difference display in one-hour incre-
ments. The time difference can be set from
+3 to –3 hours.
8
If necessary, set to summer time.
Summer time is off by default. Touch "Off" to
change the time if you are in the summer time
period. This turns the display below summer
time "On".
9
This completes the setup of your navigation sys-
tem. Chapter 1 explains the basic operation of
your navigation system.
Adjusting the Response Posi-
tions of the Touch Panels
(Touch Panel Calibration)
If you feel that the touch keys on the screen devi-
ate from the actual positions that respond to your
touch, adjust the response positions of the touch
panel. There are two adjustment methods: 4-point
Time difference
adjustment, in which you touch four corners of
the screen, and 16-point adjustment, in which
you make fine-adjustments on the entire screen.
Stylus (supplied with navigation system)
1
2
3
To complete the setting, touch "Back".
The map of your surroundings appears.
To change the time later
Page 65
Make sure to use the supplied stylus for
adjustment and gently touch the screen. If
you press the touch panel forcefully, the touch
panel may be damaged. Do not use a sharp
pointed tool such as a ballpoint pen or a
mechanical pen. Otherwise the screen is
damaged.
Press the VOLUME knob to switch to the
Audio operation screen.
Press the MENU button to change to the
AV Source screen.
Press and hold the MENU button for two
seconds or more.
The 4-point touch panel adjustment screen
appears.
117
Hide quick links:
Advertisement
Chapters
Table of Contents
