Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Bosch VDN-5085
Summary of Contents for Bosch VDN-5085
- Page 1 FLEXIDOME 5000 AN VDN-5085 Installation Manual...
-
Page 3: Table Of Contents
Setting up the camera 4.2.1 Camera positioning 4.2.2 Menu navigation 4.2.3 Focal length and focus 4.2.4 Heater 4.2.5 Closing the unit Configuration Menus 5.1.1 Top level menus 5.1.2 Menu navigation Pre-defined modes Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... - Page 4 Camera ID submenu 5.6.7 Privacy masking submenu 5.6.8 Flip submenu 5.6.9 Defaults submenu Troubleshooting Resolving problems Customer service Maintenance Repairs 7.1.1 Transfer and disposal Technical Data Specifications 8.1.1 Dimensions 8.1.2 Accessories AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems...
-
Page 5: Safety
If not avoided, this could result in minor or moderate bodily injury. CAUTION! Low risk: Indicates a potentially hazardous situation. If not avoided, this could result in property damage or risk of damage to the unit. Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... -
Page 6: Important Safety Instructions
10. Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, in the case of an authorization agreement, authority to operate the equipment. -
Page 7: Connection In Outdoor Applications
Make the connections inside the water tight compartment. After connections are made ensure that the watertight compartment is tightly closed and cables and conduits are properly sealed to prevent ingress of water. Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... -
Page 8: Important Notices
| Safety FLEXIDOME 5000 AN Important notices Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material. -
Page 9: Fcc Information
The user may find the following booklet, prepared by the Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4. Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... -
Page 10: Ul Certification
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT. Bosch notice More information For more information please contact the nearest Bosch Security Systems location or visit www.boschsecurity.com AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 11: Introduction
Bilinx (bi-directional coaxial communication) – Wide operating temperature range – Lens wizard – Six pre-programmed operation modes – Dynamic noise reduction – Multiple language on-screen display – Built-in test pattern generator Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... -
Page 12: Installation
Installation should only be performed by qualified service personnel in accordance with the National Electrical Code NEC800 (CEC Section 60) or applicable local codes. CAUTION! The camera module is a sensitive device and must be handled carefully. AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 13: Disassembly
The flush-mount version consists of the following parts: Camera module and mounting base Inner liner (with sealing ring) Trim ring Dome Figure 3.1 Flush-mount The surface-mount version consists of the following parts: Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... -
Page 14: Mounting The Unit
There are several ways to mount the unit. The method of mounting depends on the type of surface and whether other mounting hardware, such as an electrical box, a surface box or other accessories are used. Note: AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 15: Mounting Tips
3.3.2 Flush mounting Figure?3.3?Flush mounting - hollow surface Solid surface (pre-drill three 8mm holes and fit supplied plugs) Three screws (supplied with camera) Integrated camera unit and base Cables Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... -
Page 16: Surface Mounting
Run the cable from the camera into the watertight compartment through the supplied grommet. – Make the connection inside the watertight compartment and clip on the cover to seal it. AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... - Page 17 Figure?3.6?Surface mounting - side connection Solid surface (pre-drill three 8mm holes and fit supplied plugs) Three screws (supplied with camera) Three screws (M5, supplied) Integrated camera unit and base Surface mounting box (VDA-455SMB) Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03...
- Page 18 Solid surface (three pre-drilled 8mm holes and fit supplied plugs) Three screws (supplied with camera) Three screws (M5, supplied) Integrated camera unit and base Surface mounting box (VDA-455SMB) Cap (remove for side-entry cables) Conduit Cables AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems...
-
Page 19: Connection And Set-Up
Push the connections back through the surface cable hole. Secure the mounting base of the camera module to the surface with three screws. Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... -
Page 20: Setting Up The Camera
S1460) is available for making this connection. When the S1460 cable is attached, there is no video available on the BNC connector to avoid interference. Figure 4.1 Camera parts Heater Monitor jack socket AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 21: Menu Navigation
Do not rotate more than 90°. 4.2.2 Menu navigation Five keys, located on the side panel, are used for navigating through the menu system. Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... - Page 22 – To close all menus at once from any menu, select the Exit item and hold down the menu/select key until the menu display disappears. AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems...
-
Page 23: Focal Length And Focus
4.2.4 Heater When using the camera at low temperatures, set the heater setting to Auto in the Install menu. The heater turns on at ambient temperatures below 0°C (+32°F). Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... -
Page 24: Closing The Unit
Place the trim ring over the dome. Align the tamper-resistant screws in the trim ring with the threaded ends in the mounting base. Use the special screwdriver bit supplied to tighten the three tamper-resistant screws. AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 25: Configuration
The camera also has an Install menu in which the installation settings can be set. To access the Install menu, press the menu/select button (center) for longer than 2 seconds. Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... -
Page 26: Menu Navigation
To close all menus at once hold down the menu/select key until the menu display disappears or continually select the Exit item. Some menus automatically close after about two minutes; other menus have to be closed manually. AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 27: Pre-Defined Modes
Enhancements are set to reduce picture noise. Useful for conditional refresh DVR and IP storage systems because reducing noise reduces the amount of storage required. Vibrant This mode has enhanced contrast, sharpness and saturation. Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... -
Page 28: Day/Night Switching
Bilinx communications can only be disabled using the buttons on the camera. Disabled camera buttons When the Bilinx communications link is active, the buttons on the camera are disabled. AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 29: Main Menu Structure
Copy active Available Copies current mode settings to the mode mode mode number selected. numbers Mode Submenu Restores camera to the factory default Defaults settings. EXIT Returns to main menu. Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... -
Page 30: Exposure Submenu
Fixed shutter 1/120 (NTSC), level of the scene is high enough. 1/250, In Fixed mode, selects shutter 1/500, speed. 1/1000, 1/2000, 1/4000, 1/10K, 1/100K AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... - Page 31 When active, some noise or spots may appear in the picture. This is normal camera behavior. It may also cause motion blur on moving objects. EXIT Returns to main menu. Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03...
-
Page 32: Day/Night Submenu
Motion - the camera avoids motion blur as long as the light level permits (it switches to monochrome earlier than it would with Color priority). AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... - Page 33 (mono) is switched Off in monochrome mode. On - the color burst remains active even in monochrome mode (required by some DVRs and IP encoders). EXIT Returns to main menu. Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03...
-
Page 34: Enhance / Dynamic Engine Submenu
A low (negative) value makes the picture less sharp. Increasing sharpness brings out more detail. Extra sharpness can enhance the details of license plates, facial features and the edges of certain surfaces. AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... - Page 35 Use in ANPR/LPR applications to reduce headlight glare. (Test on-site to ensure that it does benefit the application and is not distracting for operators of the security system.) EXIT Returns to main menu. Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03...
-
Page 36: Color Submenu
Blue gain. Saturation -15 to +5 Adjusts the color saturation. -15 gives a monochrome image; 0 gives the default saturation; +15 gives the most saturation. EXIT Returns to main menu. AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 37: Vmd Submenu
Up, Down, Left, Right arrow keys. Pressing the Select key moves the flashing cursor to the opposite corner, which can now be moved. Pressing Select again freezes the area and exits the area menu. Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... -
Page 38: Image Adjustment Submenu
5.5.7 Image Adjustment submenu Item Selection Description Digital Zoom x1, x2, x4, x8, Select the zoom factor Off, On Select On to stabilize the image. EXIT Returns to main menu. AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 39: Install Menu Structure
Select to access ID submenu Privacy Submenu Sets up a masking area masking Flip Submenu Selects flip submenu Default ALL Submenu Returns all settings for all modes to factory defaults Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... -
Page 40: Language Submenu
Select to fully open the iris. Follow the instructions for adjusting the focus for the lens. After focusing the object of interest remains in focus under bright and low light conditions. EXIT Returns to Install menu. AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 41: Synchronization Submenu
(3000 ft). For optimum results select the coaxial cable type used or, if unknown, select default. Compensation 0,1,2 . . .+15 Sets the level of cable compensation level EXIT Returns to Install menu. Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... -
Page 42: Test Signal Submenu
Shows MAC address (factory set, cannot be changed). Ticker bars On, Off The ticker bar moves continuously to show that the image is live and not frozen or played back. AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... - Page 43 Selection Description Mode ID pos. Off, Top left, Camera mode is displayed on the Top right, screen in the selected position. Bottom left, Bottom right EXIT Returns to Install menu. Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03...
-
Page 44: Privacy Masking Submenu
Pressing Select again freezes the area and exits the area menu. 5.6.8 Flip submenu Item Selection Description Flip Selects the flip mode. horizontal Vertical Both EXIT Returns to Install menu. AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 45: Defaults Submenu
Restores all settings of the six modes to their default (factory) values. Select YES then press the Menu/Select button to restore all values. When completed the message RESTORED! is shown. Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... -
Page 46: Troubleshooting
When using DC power connections. ensure that polarity is correct. No connection The unit's configuration. Check all configuration established, no parameters. image transmission. Faulty installation. Check all cables, plugs, contacts and connections. AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 47: Customer Service
Troubleshooting | en Customer service If you cannot resolve a fault, please contact your supplier or system integrator, or contact Bosch Security Systems Customer Service directly. The Installer should write down all information regarding the unit so that it can be referenced for warranty or repair. The... -
Page 48: Maintenance
Defective or superfluous devices and parts should be disposed of professionally or taken to your local collection point for hazardous materials. AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems... -
Page 49: Technical Data
Dynamic engine XF Dynamic, HDR, Smart BLC Dynamic Range 94 dB Dynamic Noise 3D-NR, 2D-NR Reduction Sharpness Sharpness enhancement level selectable White Balance ATW indoor, ATW outdoor, ATW hold and manual Contrast Low, Medium, High Enhancement Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... - Page 50 24 VDC 330 mA (650 mA with heater on) Weight 750 g (1.65 lb) Operating -30 °C to +55 °C (-22 °F to +131 °F) temperature (-50 °C [-58 °F] with heater enabled) Controls OSD with softkey operation AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems...
-
Page 51: Dimensions
FLEXIDOME 5000 AN Technical Data | en 8.1.1 Dimensions 57.6 (2.27) 57.6 (2.27) 95 (3.7) 158 (6.22) mm (in) Figure 8.1 Dimensions - Flush-mount Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... - Page 52 | Technical Data FLEXIDOME 5000 AN 53.3 (2.1) 53.3 (2.1) 158 (6.22) mm (in) Figure 8.2 Dimensions - Surface-mount AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems...
-
Page 53: Accessories
Pendant ceiling mount – Corner mount – Bilinx communication interface box and software Contact a Bosch representative in your area for the latest available accessories or visit our website at www.boschsecurity.com Bosch Security Systems Installation Manual AM18-Q0648 | v1.0 | 2013.03... - Page 54 | Technical Data FLEXIDOME 5000 AN AM18-Q0648 | v1.0 | 2013.03 Installation Manual Bosch Security Systems...
- Page 56 Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2013...