Statically Assign An Ip Address - D-Link DWR-512 User Manual
Hsupa 3g router
Hide thumbs
Also See for DWR-512:
- Quick installation manual (33 pages) ,
- Quick installation manual (60 pages)
Table of Contents
Advertisement
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows
Vista
-
Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network
®
™
Connections.
Click on Start > Control Panel > Network Connections.
Windows
XP -
®
From the desktop, right-click My Network Places > Properties.
Windows
®
2000 -
Step 2
Right-click on the Local Area Connection which represents your network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your
network or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where
X is a number between 2 and 99. Make sure that the number you choose is not in use on the
network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary
DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
D-Link DWR-512 User Manual
81
Hide quick links:
Advertisement
Table of Contents
