Managing Cts 3010 And Cts 3210 Hardware Setup - Cisco CTS 1000 - TelePresence System 1000 Video Conferencing Administration Manual
Telepresence system
Hide thumbs
Also See for CTS 1000 - TelePresence System 1000 Video Conferencing:
- Hardware options & upgrade manual (142 pages)
Table of Contents
Advertisement
Managing CTS 3010 and CTS 3210 Hardware Setup
•
•
•
Managing CTS 3010 and CTS 3210 Hardware Setup
You can manage and test the following Cisco TelePresence System components:
•
•
•
•
•
•
•
Before You Begin
Before you begin testing and troubleshooting your system, check the system displays. All of the
Cisco TelePresence System Administration interface Hardware Setup features require the use of the
displays in the meeting room. Therefore, we recommend the following:
1.
2.
Note
You must test the speakers before testing the microphones because the microphone test depends on
speakers that are functioning properly. See the
Figure 10-1
you with troubleshooting tasks.
Cisco TelePresence System Administration Guide
10-2
Troubleshooting Video Quality Settings, page 10-41
Troubleshooting Network Cabling, page 10-41
Where to Go Next, page 10-43
Managing Displays, page 10-3
Testing Cameras, page 10-7
Testing Speakers, page 10-17
Testing Microphones, page 10-19
Testing the External Presentation Display, page 10-22
Testing Presentation Devices, page 10-23
Testing Other Devices, page 10-30
Verify that the displays work by using the Hardware Setup > Displays tests in this section.
If the displays are showing the correct images, you can proceed to testing the cameras, speakers, and
microphones, as needed.
shows an example of the Cisco TelePresence System administration tools available to assist
Chapter 10
Troubleshooting the CTS 3010 and CTS 3210
"Testing Speakers" section on page
10-17.
OL-21845-01
Advertisement
Table of Contents
Troubleshooting
