Related Information; Testing The Network Connection; Managing Configuration Issues - Cisco CTS 1000 - TelePresence System 1000 Video Conferencing Administration Manual
Telepresence system
Hide thumbs
Also See for CTS 1000 - TelePresence System 1000 Video Conferencing:
- Hardware options & upgrade manual (142 pages)
Table of Contents
Advertisement
Testing the Network Connection
Related Information
For more system troubleshooting information, see the
Guide
Testing the Network Connection
Use the Network Connection window to view and modify the duplex and automatic negotiation settings
for the Cisco TelePresence system Ethernet connection. Auto negotiation is set to Off by default.
You can change the following network connection settings:
•
•
To manage Auto Negotiation:
Choose Troubleshooting > Network Connection.
Step 1
Click the On or Off radio button to enable or disable auto negotiation. The Apply and Reset buttons are
Step 2
activated, as shown in
When Auto Negotiation is enabled, the Duplex and Speed settings are read-only.
Note
Figure 8-43
Click Apply to save your settings or click Reset to restore the original settings.
Step 3
Related Information
For more system troubleshooting information, see the
Guide
Managing Configuration Issues
Use the Configuration Issues window to view hardware and software versions and to reset the system to
use the factory default software image and the default configuration.
Cisco TelePresence System Administration Guide
8-68
on Cisco.com.
Auto Negotiation on
Auto Negotiation off
Figure
8-43.
Auto Negotiate On
on Cisco.com.
Chapter 8
Troubleshooting the CTS 1300
Cisco TelePresence System Troubleshooting
Cisco TelePresence System Troubleshooting
OL-21845-01
Advertisement
Table of Contents
Troubleshooting
