Error Codes - Canon EOS 70D Instruction Manual
Canon digital cameras instruction manual
Hide thumbs
Also See for EOS 70D:
- Basic instruction manual (678 pages) ,
- Instruction manual (174 pages) ,
- Manual (48 pages)
Table of Contents
Advertisement
Error Codes
Error number
Cause and countermeasures
Number
Communications between the camera and lens is faulty. Clean the
lens contacts.
01
Clean the electrical contacts on the camera and lens, use a Canon
lens, or remove and install the battery pack again (p.19, 20, 30).
Card cannot be accessed. Reinsert/change card or format card
with camera.
02
Remove and insert the card again, replace the card, or format the
card (p.31, 57).
Cannot save images because card is full. Replace card.
04
Replace the card, erase unnecessary images, or format the card
(p.31, 57, 322).
The built-in flash could not be raised. Turn the camera off and on
again.
05
Operate the power switch (p.35).
Sensor cleaning could not be performed. Turn the camera off and
on again.
06
Operate the power switch (p.35).
10, 20
An error prevented shooting. Turn the camera off and on again or
30, 40
re-install the battery.
50, 60
Operate the power switch, remove and install the battery pack
70, 80
again, or use a Canon lens (p.30, 35).
99
* If the error still persists, write down the error number and contact your
nearest Canon Service Center.
432
If there is a problem with the camera, an
error message will appear. Follow the on-
screen instructions.
Error Message and Solution
- Quick Links:
- Advanced Operations
Hide quick links:
Advertisement
Table of Contents
