Table of Contents
Advertisement
Switching between continuous paper and single-sheet
paper in the cut-sheet feeder
You can easily switch between continuous paper on a push tractor and
single-sheet paper in the cut-sheet feeder without removing the continuous
paper.
Switching to continuous paper
1.
If any sheets are in the paper path, press the Load/Eject button
to eject them.
2.
Move the printer's paper release lever to the front or rear push tractor
position. Also set the paper thickness lever to the proper position for
your paper.
3.
Move the cut-sheet feeder's paper selection lever to the continuous
paper position.
Switching to single-sheet paper in the cut-sheet feeder
If any continuous paper remains in the printer, press the Tear Off/Bin
1.
button to advance the paper to the tear-off position. Then tear off the
printed pages.
Caution:
c
Tear off any printed documents before pressing the Load/Eject button in
the next step. Reverse feeding several pages at a time may cause a paper jam.
2.
Press the Load/Eject button. The printer feeds the paper backward to
the standby position. The paper is still attached to the push tractor but
is no longer in the paper path.
3.
Move the printer's paper release lever to the single-sheet position. Also
set the paper thickness lever to the proper position for the thickness of
your single-sheet paper.
4.
Move the cut-sheet feeder's paper type lever to the single-sheet
position.
5.
If you are using the double-bin cut-sheet feeder, select the bin you want
to use as described on "Selecting the paper source (bin 1 or bin 2)" on
page A-10.
Enhancing Your Printer With Options
A
A-11
Advertisement
Table of Contents
