APPENDIX
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Sewing Large-size (Split) Embroidery Patterns
Large-size (split) embroidery patterns created with PE-DESIGN Ver.7 or later can be sewn. With large-size
embroidery patterns, embroidery designs larger than the embroidery hoop are divided into multiple sections,
which combine to create a single pattern after each section is sewn.
For details on creating large-size embroidery patterns and for more detailed sewing instructions, refer to the
operation manual included with PE-DESIGN Ver.7 or later.
The following procedure describes how to read the large-size embroidery pattern shown below from USB
media and embroider it.
1
Connect to the machine the media
containing the created large-size embroidery
pattern, and then select the large-size
embroidery pattern to be embroidered.
* For details on recalling patterns, refer to "USB
media" on page 160.
A screen appears so that a section of the
large-size embroidery pattern can be
selected.
214
2
Select section
to be embroidered, then
touch
.
• Select the sections in alphabetical order.
• A maximum of 18 sections can be
displayed in one page with normal
thumbnail size. If there are 19 or more
sections in the pattern, touch
to display the previous or next page. With
large thumbnail size, a maximum of 10
sections can be displayed in one page.
or