Epson TM-T88III Programming Manual page 651

Paper roll printers esc/pos application

Hide thumbs Also See for TM-T88III:

Table of Contents

C O N F I D E N T I A L

[Position information B] is shown in the following.

2 to 5 (Reserved)

• Bits 0 and 1 always becomes "0" when the paper layout is "Receipt (without black mark)" and when

• "Present label" is a print area of the label paper or the black mark paper which corresponds to either of

• "The next label" is "print area of the following label paper or the black mark paper of the present

See previous [Notes for transmission process] for description of transmission process.

[Model-dependent variations]

Printing paper commands

The print start of the current label can operate.

The print start operation of the current label is impossible. 1

The print start of the next label can operate.

The print start of the next label is impossible.

the cover is open.

the following:

a) "Print area where print start position exists right under label peeling position" right after executing

<Function 65>.

b) "Print area where print start position exists right under cutting position" right after executing

<Function 66> .

c) "Print area at print start position" right after executing <Function 67> and the print start operation.

d) Print area with print position, except for the above-mentioned.

Binary Hex Decimal

Ver. 10.01 p. 651

Show Quick Links

Table of Contents