Epson TM-T88III Programming Manual page 306

Paper roll printers esc/pos application

Hide thumbs Also See for TM-T88III:

Table of Contents

C O N F I D E N T I A L

Ink status B (

When you use this command, obey the following rules.

• After the host PC transmits the function data, the printer will send response data or status data back to

• Only when it is necessary to acquire plural, real-time status items continuously, up to the limitation of

• With serial interface, use this command when the printer is in Ready status.

• With a parallel interface, a real-time status is stored in the transmission buffer of the printer

Status commands

= 2) is as follows:

No ink near-end detected (2nd color)

Ink near-end detected (2nd color)

No ink end detected (2nd color)

Ink end detected (2nd color)

Ink cartridge detected (2nd color)

Ink cartridge not detected (2nd color) 1

the PC. Do not transmit more data from the PC until the real-time status data are received from the

the printer model, DLE EOT commands can be transmitted continuously. However, the next data is not

transmitted until all status items are received in this case.

temporarily the same as the other transmission data (except for ASB status), and when the host enters

Reverse Mode, data is transmitted in order from the beginning of the transmission buffer. The

Ver. 10.01 p. 306

Show Quick Links

Table of Contents