Epson TM-T88III Programming Manual page 192

Paper roll printers esc/pos application

Hide thumbs Also See for TM-T88III:

Table of Contents

C O N F I D E N T I A L

Set relative vertical print position in page mode

[Printers not featuring this command] TM-U230, TM-U220, TM-U210,

[Description]

In page mode, moves the vertical print position to (

the current position.

This command is enabled only in page mode. If this command is processed in standard mode, it is ignored.

The printer ignores any setting that exceeds the print area set by ESC W.

A positive number specifies movement to the downward, and a negative number specifies movement to

the upward. N pitch movement to the downward: (

setting N pitch movement to the upward: (

The horizontal or vertical motion unit is used for the print direction set by ESC T.

• When the starting position is set to the upper left or lower right of the print area using ESC T, the

• When the starting position is set to the upper right or lower left of the print area using ESC T, the

Even if vertical or horizontal motion unit is changed after changing the print position, the setting of print

position will not be changed.

"\" is corresponds to "\" in JIS code set.

[Model-dependent variations]

Print position commands

× 256) ≤ 32767

vertical motion unit is used.

horizontal motion unit is used.

TM-J2000/J2100, TM-T90, TM-T88III, TM-L90, TM-L60II,

× 256) = 65536 – N.

× 256) × (vertical or horizontal motion unit) from

× 256) = N. Use the complement of N for

XECUTING COMMAND

Ver. 10.01 p. 192

Show Quick Links

Table of Contents