Epson TM-T88III Programming Manual page 273
Paper roll printers esc/pos application
Hide thumbs
Also See for TM-T88III:
- Specification (183 pages) ,
- User manual (65 pages) ,
- Technical bulletin (5 pages)
Table of Contents
Advertisement
C O N F I D E N T I A L
•
•
•
[Notes]
The functions used to store graphics data directly to the print buffer are this function and Function 112.
Even with printer models that support both, it is recommended that only one of the functions be used for
data definition tasks.
The two functions differ only in that one function (this function) defines data in raster format, while the
other (Function 112) defines data in column format.
Use this function when the printer enters the "beginning of the line" or "except for graphic data, no data
in print buffer" state during the standard mode.
This function is incompatible with macros, so make sure to avoid including it when defining macros.
Graphics data that exceeds the print area for one line will not be printed.
The scales for width and height of graphics are specified by (
270° clockwise-rotated graphics, the printer applies print area and dot density from [
feed,
Settings for text effect (bold, underline, orientation) and font size do not affect the printing of the
graphics data.
Print position does not change before and after this function is used. Overprinting of data of multiple
colors can be performed by simply changing the selected color (
impossible to specify the same color to overprint.
Use Function 50 to print graphics after graphics data has been stored in the print buffer when the
standard mode is selected.
The data for byte
d
(
) specifies "1" for bits corresponding to dots that will be printed and "0" for bits corresponding to dots
that will not be printed.
Graphics data is defined using the dot density set by Function 49.
During processing of this function, real time commands aren't available.
Paper roll
Bit-image commands
y
y
and
specify the number of dots in the vertical direction as (
L
H
d
specifies the stored data (column format).
k
indicates the number of the graphics data.
to be transmitted.
y
: perpendicular to direction of paper feed].
k
of
d1 ... dk
GS ( L GS 8 L
k
is an explanation parameter; therefore it does not need
is processed as a single item of defined graphics data. The defined data
× 256).
y
y
+
L
H
x
,
y
). Therefore, in page mode with 90° or
x
: direction of paper
c
) and running this function again, but it is
Ver. 10.01 p. 273
Hide quick links:
Advertisement
Table of Contents
