Table of Contents
Advertisement
The Control Panel
1
2
2
3
4
5
1 Programme Guide
2 ON/OFF LAMP
It lights when the appliance is operating.
3 Rinse hold button
Available only for programmes 7 to 12
Press this button to make the machine stop with water in
the drum after the synthetic or delicate wash cycles.
This prevents any creasing which may take place if the
clothes are left damp in the drum. When it is convenient
for you to empty the machine, simply press this button
again so that the machine can proceed to drain and short
spin, or turn the dial to the drain programme "13". If
this button is not activated, the washing programmes
will end with a short spin.
4 Half load button
Available only for programmes 1 to 4
Pressing this button before starting the intense program
there will be one rinse less which leads to energy and
water saving.
F L S - 8 7 9 C
6
7
8
9
10 11 12 13
1
2
3
4
5
5 Reduced spin button
By depressing this button the spin speed will be reduced
as follows:
- cotton and linen programmes: from 850 to 400 rpm
- synthetics, delicates and wool programmes: from 540
to 380 rpm
6. TEMPERATURE SELECTOR
This control allows you to select the temperature of the
washing cycle in accordance with the kind of clothes to
be washed.
To select the required temperature turn the control until
the marker on the top coincides with the required
temperature (reference mark on the control panel).
On the program chart you will find the most appropriate
temperature for each kind of washing.
7. PROGRAM SELECTOR
To select the required program turn the control
clockwise until the marker on the top coincides with the
number of the required program (reference mark on the
control panel).If at any chance you pass by the required
number NEVER TURN THE CONTROL
ANTICLOCKWISE just continue clockwise until the
required number is reached again.
6
1
6
7
Hide quick links:
Advertisement
Table of Contents
