Table of Contents
Advertisement
Objectives
Warning
Objectives
Organization
Table 1
Cisco Digital PBX Adapter 7630 Administration Guide Organization
Chapter
Chapter 1, "Overview"
Chapter 2, "Preparing to Install the VG248"
Chapter 3, "Installing the VG248"
Appendix A, "Regulatory Compliance and
Technical Specifications"
Appendix B, "Translated Safety Warnings"
Cisco VG248 Analog Phone Gateway Hardware Installation Guide
viii
Only trained and qualified personnel should be allowed to install,
replace, or service this equipment.
This guide provides the required steps to install the VG248. You must use this
guide in conjunction with the Cisco VG248 Analog Phone Gateway Software
Configuration Guide to get the VG248 up and running on your network.
Because of the complexity of an IP telephony network, this guide does not provide
detailed information for required procedures performed on other Cisco or
third-party devices. Refer to the documentation provided with these systems for
installation and configuration instructions.
Table 1
provides an overview of the organization of this guide.
Description
Provides overview of the hardware features and
technical specifications of the VG248.
Provides information about preparing the site for
installation, required tools, and safety
information.
Describes the steps required to properly and safely
install and configure the VG248 in your network.
Provides regulatory compliance and technical
specifications for the VG248.
Provides translations of safety warnings used in
this guide.
About this Guide
78-13154-01
Advertisement
Table of Contents
