Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READY
Turning on the machine
Memo
Before turning on the machine, be sure to
attach the embroidery unit to it. If the
embroidery unit is not attached, the machine
does not operate. (For details, refer to
"Attaching the Embroidery Unit" (page 19).)
Prepare the included power supply cord.
a
Make sure that the machine is turned off (the
main power switch is set to "
plug the power supply cord into the power
supply jack on the right side of the machine.
b
Insert the plug of the power supply cord into a
household electrical outlet.
1
a Power supply jack
c
Press the right side of the main power switch
on the right side of the machine to turn the
machine on (set it to "|").
The light, LCD and
light up when the machine is turned on.
Memo
When the machine is turned on, the needle
will make sound when it moves; this is not a
malfunction.
18
"), and then
(Start/stop button)
Turning off the machine
When you have finished using the machine, turn it
off. In addition, before transporting the machine to
another location, be sure to turn it off.
a
Make sure that the machine is completely
stopped.
b
Press the left side of the main power switch on
the right side of the machine to turn the
machine off (set it to "
The light, LCD and
off when the machine is turned off.
c
Unplug the power supply cord from the
electrical outlet.
Grasp the plug when unplugging the power
supply cord.
d
Unplug the power cord from the power supply
jack.
Note
If a power outage occurs while the machine
is being operated, turn off the machine and
unplug the power supply cord. When
restarting the machine, follow the necessary
procedure to correctly operate the machine.
(For U.S.A. only)
This appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electrical shock, this plug is intended
to fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper
outlet. Do not modify the plug in any way.
").
(Start/stop button) go
Advertisement
Table of Contents
Troubleshooting
