Sewing Start And End Backtacking And Continuous Backtacking And Locking Thread Trimming - Brother S-7220B Instruction Manual
Single needle direct drive needle feed lock stitcher with thread trimmer
Hide thumbs
Also See for S-7220B:
- Manual de instrucciones (74 pages) ,
- Instruction manual (72 pages) ,
- Basic operation manual (28 pages)
Table of Contents
Advertisement
7-2. Sewing start and end backtacking and continuous backtacking and
locking thread trimming
<Setting method>
Thread trimming not locked
Thread trimming is carried out
1
Activating setting mode
Switching between start and end backtacking mode and continuous backtacking mode
2
Thread trimming
is carried out
(For example 0: Start and
end backtacking mode)
7. USING THE CONTROL BOX PANEL (BASIC OPERATIONS)
Thread trimming is not carried out.
3658M
1. If the power is turned on, turn off the power switch (1)
temporarily.
2. While pressing the start backtack key (2), turn on the
power switch (1).
0: Start and end backtacking mode
1: Continuous backtacking mode
1. Press the start backtack key (2) so that "C" is displayed in
the top row of the stitch number display.
2. Press the end backtack key (3) to set the mode in the
bottom row of the stitch number display.
S-7220B
Thread trimming locked
Thread trimming is
not carried out.
C: Mode switching
(Continued on next page)
3659M
3660M
3661M
28
Hide quick links:
Advertisement
Table of Contents
