Wpa/Wpa2-Personal (Psk) - D-Link DIR-626L Manual

Manual

Hide thumbs Also See for DIR-626L:

User manual (140 pages)

Datasheet (3 pages)

Quick install manual (1 page)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

Table of Contents

Section 3 - Configuration

It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish

wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the

added overhead.

1. Log into the web-based configuration by opening a web browser and

entering the IP address of the router (192.168.0.1). Click on Setup and

then click Wireless Settings on the left side.

2. Next to Security Mode, select WPA-Personal.

3. Next to WPA Mode, select Auto, WPA2 Only, or WPA Only. Use Auto

if you have wireless clients using both WPA and WPA2.

4. Next to Cypher Type, select TKIP and AES, TKIP, or AES.

5. Next to Group Key Update Interval, enter the amount of time before

the group key used for broadcast and multicast data is changed (3600

is default).

6. Next to Pre-Shared Key, enter a key (passphrase). The key is entered as

a pass-phrase in ASCII format at both ends of the wireless connection.

The pass-phrase must be between 8-63 characters.

7. Click Save Settings to save your settings. If you are configuring the

router with a wireless adapter, you will lose connectivity until you

enable WPA-PSK on your adapter and enter the same passphrase as

you did on the router.

D-Link DIR-626L User Manual