hit counter script
HP P2000 Reference Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Storage
  5. StorageWorks P2000
  6. Reference manual

HP P2000 Reference Manual

Msa system
Hide thumbs Also See for P2000:
Table of Contents

Advertisement

Quick Links

See also: Reference Manual , Configuration Manual
HP P2000 G3 MSA System
SMU Reference Guide
Part number: 50091 1-006
First edition: May 201 1

Advertisement

Table of Contents
loading

Related Manuals for HP P2000

Summary of Contents for HP P2000

  • Page 1 HP P2000 G3 MSA System SMU Reference Guide Part number: 50091 1-006 First edition: May 201 1...
  • Page 2 Legal and notice information © Copyright 201 1 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.21 1 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s standard commercial license.

  • Page 3: Table Of Contents

    About data protection in a single-controller storage system ....... . 34 HP P2000 G3 MSA System SMU Reference Guide...
  • Page 4 2 Configuring the system..........35 Using the Configuration Wizard.
  • Page 5 Checking links in the local system ........... . 87 HP P2000 G3 MSA System SMU Reference Guide...
  • Page 6 5 Viewing system status ..........89 Viewing information about the system .
  • Page 7 Installing a license file ............142 HP P2000 G3 MSA System SMU Reference Guide...
  • Page 8 About the P2000 G3 MSA System SMI-S provider ....... . .
  • Page 9 6 Example of primary-volume failure ..........111 HP P2000 G3 MSA System SMU Reference Guide...
  • Page 10 Figures...
  • Page 11 16 CIM Alert indication events ........... . . 146 HP P2000 G3 MSA System SMU Reference Guide...
  • Page 12 Tables...

  • Page 13: About This Guide

    About this guide This guide provides information about managing an HP P2000 G3 MSA System by using its web interface, Storage Management Utility (SMU). Intended audience This guide is intended for storage system administrators. Prerequisites Prerequisites for using this product include knowledge of: •...

  • Page 14: Document Conventions And Symbols

    Document conventions and symbols Table 1 Document conventions Convention Element Medium blue text: Figure 1 Cross-reference links and e-mail addresses Medium blue, underlined text Web site addresses (http://www.hp.com) Bold font • Key names • Text typed into a GUI element, such as into a box •...

  • Page 15: Product Warranties

    • http://www.hp.com/support/downloads • http://www.hp.com/storage/whitepapers • http://www.hp.com/go/p2000 Documentation feedback HP welcomes your feedback. To make comments and suggestions about product documentation, please send a message to storagedocs.feedback@hp.com. All submissions become the property of HP. HP P2000 G3 MSA System SMU Reference Guide...
  • Page 16 About this guide...

  • Page 17: Getting Started

    SMU is also referred to as the web-browser interface (WBI). NOTE: It is possible to upgrade an MSA2000 storage system by replacing its controllers with P2000 G3 controllers, which use the version of SMU described in this guide. For upgrade information go to http://www.hp.com/go/p2000...

  • Page 18: Tips For Signing In And Signing Out

    On the Sign In page, enter the name and password of a configured user. The default user name and password are manage and !manage. If you are logging in to SMU for the first time, the Language field displays user setting or English, either of which results in English. Language preferences can be configured for the system and for individual users.

  • Page 19: Tips For Using The Help Window

    For example, if the unit is set to TB, precision is set to 1, and base is set to 10, the size 0.1 1709 TB is shown as 1 17.1 GB. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 20: Related Topics

    • Temperature Preference. Specifies to use either the Celsius scale or the Fahrenheit scale for temperature values. • Auto Sign Out. Select the amount of time that the user’s session can be idle before the user is automatically signed out (2–720 minutes). The default is 30 minutes. •...

  • Page 21: Related Topics

    A best practice is to designate spares for use if disks fail. Dedicating spares to vdisks is the most secure method, but it is also expensive to reserve spares for each vdisk. Alternatively, you can enable dynamic spares or assign global spares. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 22: Related Topics

    Related topics • Configuring dynamic spares on page 47 • Managing dedicated spares on page 53 • Managing global spares on page 60 • Using the Provisioning Wizard on page 57 • Creating a vdisk on page 59 • Viewing information about a vdisk (page 92) or all vdisks (page...

  • Page 23: Related Topics

    For example, a payroll volume could be mapped with read-write access for the Human Resources host and be masked for all other hosts. An engineering volume could be mapped with read-write access for the Engineering host and read-only access for other departments’ hosts. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 24: Related Topics

    P2000 G3 MSA System models use Unified LUN Presentation (ULP), which can expose all LUNs through all host ports on both controllers. The interconnect information is managed in the controller firmware. ULP appears to the host as an active-active storage system where the host can choose any available path to access a LUN regardless of vdisk ownership.

  • Page 25: Optimizing Read-Ahead Caching

    Related topics • Changing a volume’s cache settings on page 55 • Changing system cache settings on page 49 • Viewing information about a volume on page 95 HP P2000 G3 MSA System SMU Reference Guide...

  • Page 26: About Managing Remote Systems

    About managing remote systems You can add a management object to obtain information from a remote storage system. This allows a local system to track remote systems by their network-port IP addresses and cache their login credentials — the user name and password for a manage-level user on that system. The IP address can then be used in commands that need to interact with the remote system.

  • Page 27: Rolling Back A Master Volume

    Or you can choose to include the modified data since the snapshot was taken, which will revert the data on the master volume to the current snapshot. Snap Pool-1 Figure 2 Rolling back a master volume HP P2000 G3 MSA System SMU Reference Guide...

  • Page 28: Related Topics

    Snapshot operations are I/O-intensive. Every write to a unique location in a master volume after a snapshot is taken will cause an internal read and write operation to occur in order to preserve the snapshot data. If you intend to create snapshots of, create volume copies of, or replicate volumes in a vdisk, ensure that the vdisk contains no more than four master volumes, snap pools, or both.

  • Page 29: Related Topics

    Related topics • Creating a volume copy on page 69 • Aborting a volume copy on page 70 • Viewing information about a volume on page 95 • Deleting schedules on page 75 HP P2000 G3 MSA System SMU Reference Guide...

  • Page 30: About The Vds And Vss Hardware Providers

    About the VDS and VSS hardware providers Virtual Disk Service (VDS) enables host-based applications to manage vdisks and volumes. Volume Shadow Copy Service (VSS) enables host-based applications to manage snapshots. For more information, see the VDS and VSS hardware provider documentation for your product. About RAID levels The RAID controllers enable you to set up and manage vdisks, whose storage may be spread across multiple disks.

  • Page 31: About Size Representations

    (RAM and ROM) size is always shown in base 2. In SMU, the base for entry and display of storage-space sizes can be set per user or per session. When entering storage-space sizes only, either base-2 or base- 1 0 units can be specified. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 32: Related Topics

    Table 7 Size representations in base 2 and base 10 Base 2 Base 10 Unit Size in bytes Unit Size in bytes KiB (kibibyte) 1,024 KB (kilobyte) 1,000 MiB (mebibyte) 1,024 MB (megabyte) 1,000 GiB (gibibyte) GB (gigabyte) 1,024 1,000 TiB (tebibyte) TB (terabyte) 1,024...

  • Page 33: About Storage-Space Color Codes

    • Enable the Dynamic Spare Capability option to use the new disks without designating them as spares. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 34: About Data Protection In A Single-Controller Storage System

    About data protection in a single-controller storage system A P2000 G3 MSA System can be purchased or operated with a single controller. Because single-controller mode is not a redundant configuration, this section presents some considerations concerning data protection.

  • Page 35: Configuring The System

    When DHCP is enabled, the following initial values are set and remain set until the system is able to contact a DHCP server for new addresses: • Controller A IP address: 10.0.0.2 • Controller B IP address: 10.0.0.3 • IP subnet mask: 255.255.255.0 HP P2000 G3 MSA System SMU Reference Guide...

  • Page 36: Step 4: Enabling System-Management Services

    • Gateway IP address: 0.0.0.0 CAUTION: Changing IP settings can cause management hosts to lose access to the storage system. To use DHCP to obtain IP values for network ports Set IP address source to DHCP. Click Next to continue. To set static IP values for network ports Determine the IP address, subnet mask, and gateway values to use for each controller.

  • Page 37: Step 5: Setting System Information

    FC devices connected in an arbitrated loop. HP P2000 G3 MSA System SMU Reference Guide...
  • Page 38 • Connection mode can be set to loop, point-to-point, or auto (the default). Loop protocol can be used in a physical loop or in a direct physical connection between two devices. Point-to-point protocol can only be used on a direct physical connection between exactly two devices. Auto sets the mode based on the detected connection type.

  • Page 39: Step 8: Confirming Configuration Changes

    The panel also shows the licensing serial number (controller enclosure serial number) and licensing version number (controller firmware version), for which a license file must be generated in order to successfully install. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 40: Configuring System Services

    To create a temporary license In the Configuration View panel, right-click the system and select Tools > Install License. If the option to create a temporary license is available, the End User License Agreement appears in the lower portion of the license panel. Read the license agreement.

  • Page 41: Configuring Email Notification

    • Trap Host Address fields. IP addresses of up to three host systems that are configured to receive SNMP traps. Click Apply. Optionally, send a test message to the configured destinations as described on page HP P2000 G3 MSA System SMU Reference Guide...

  • Page 42: Configuring User Accounts

    Configuring user accounts Adding users To add a user In the Configuration View panel, right-click the system and select Configuration > Users > Add User. In the main panel, set the options: • User Name. A user name is case sensitive; cannot already exist in the system; cannot include a comma, double quote, or backslash;...

  • Page 43: Modifying Users

    Click Remove User. A confirmation dialog appears. Click Remove to continue; otherwise, click Cancel. If you clicked Remove, a processing dialog appears. When processing is complete, the user is removed from the table. Click OK. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 44: Configuring System Settings

    Configuring system settings Changing the system date and time You can enter values manually for the system date and time, or you can set the system to use NTP as explained in About the system date and time on page 32. Date and time values use Coordinated Universal Time (UTC).
  • Page 45 • iSNS Address. Specifies the IP address of an iSNS server. The default address is all zeroes. • Alternate iSNS Address. Specifies the IP address of an alternate iSNS server, which can be on a different subnet. The default address is all zeroes. Click Apply. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 46: Changing Network Interface Settings

    Changing network interface settings You can configure addressing parameters for each controller’s network port. You can set static IP values or use DHCP. In DHCP mode, network port IP address, subnet mask, and gateway values are obtained from a DHCP server if one is available.

  • Page 47: Setting System Information

    To change the dynamic spares setting In the Configuration View panel, right-click the system and select Configuration > Advanced Settings > Disk. Either select (enable) or clear (disable) the Dynamic Spare Capability option. Click Apply. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 48: Configuring Drive Spin Down For Available Disks And Global Spares

    Configuring drive spin down for available disks and global spares The drive spin down (DSD) feature monitors disk activity within system enclosures and spins down inactive disks. You can enable or disable DSD for available disks and global spares, and set the period of inactivity after which the vdisk’s disks and dedicated spares automatically spin down.

  • Page 49: Configuring The Emp Polling Rate

    • Illegal Request. Sends a reply that there is a LUN but that the request is “illegal.” Sense data returned is a Sense Key of 5h and an ASC/ASCQ of 25/00. Click Apply. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 50: Controlling Host Access To The System's Write-Back Cache Setting

    Controlling host access to the system’s write-back cache setting You can prevent hosts from using commands to change the system’s write-back cache SCSI MODE SELECT setting. Some operating systems disable write cache. If host control of write-back cache is disabled, the host cannot modify the cache setting.

  • Page 51: Configuring System Utilities

    In the Configuration View panel, right-click the system and select Configuration > Advanced Settings > System Utilities. Either select (enable) or clear (disable) the Disk Scrub option. This option is disabled by default. Click Apply. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 52: Configuring Utility Priority

    Configuring utility priority You can change the priority at which the Verify, Reconstruct, Expand, and Initialize utilities run when there are active I/O operations competing for the system’s controllers. To change the utility priority In the Configuration View panel, right-click the system and select Configuration > Advanced Settings > System Utilities.

  • Page 53: Configuring A Vdisk

    In the Configuration View panel, right-click a vdisk and select Configuration > Modify Vdisk Owner. The main panel shows the vdisk’s owner. Select a new owner. Click Modify Owner. A confirmation dialog appears. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 54: Configuring Drive Spin Down For A Vdisk

    Click Yes to continue; otherwise, click No. If you clicked Yes, a processing dialog appears. When processing is complete a success dialog appears. Click OK. Configuring drive spin down for a vdisk The drive spin down (DSD) feature monitors disk activity within system enclosures and spins down inactive disks.

  • Page 55: Changing A Volume's Cache Settings

    Enter a new name. A snap pool name is case sensitive; cannot already exist in a vdisk; cannot include a comma, double quote, or backslash; and can have a maximum of 20 bytes. Click Modify Name. The new name appears in the Configuration View panel. HP P2000 G3 MSA System SMU Reference Guide...
  • Page 56 Configuring the system...

  • Page 57: Provisioning The System

    • Vdisk name. Optionally change the default name for the vdisk. A vdisk name is case sensitive; cannot already exist in the system; cannot include a comma, double quote, or backslash; and can have a maximum of 20 bytes. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 58: Step 3: Selecting Disks

    • Assign to. If the system is operating in Active-Active ULP mode, optionally select a controller to be the preferred owner for the vdisk. The default, Auto, automatically assigns the owner to load-balance vdisks between controllers. If the system is operating in Single Controller mode, the Assign to setting is ignored and the system automatically load-balances vdisks in anticipation of the insertion of a second controller in the future.

  • Page 59: Step 5: Setting The Default Mapping

    • RAID Level. Select a RAID level for the vdisk. • Number of Sub-vdisks. For a RAID- 1 0 or RAID-50 vdisk, optionally change the number of sub-vdisks that the vdisk should contain. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 60: Deleting Vdisks

    • Chunk size. For RAID 3, 5, 6, 10, or 50, optionally set the amount of contiguous data that is written to a vdisk member before moving to the next member of the vdisk. For RAID 50, this option sets the chunk size of each RAID-5 sub-vdisk.

  • Page 61: Creating A Volume Set

    The default size is either 20% of the volume size or the minimum snap-pool size, whichever is larger. • Attach Pool. Select an existing snap pool to associate with the new volume. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 62: Deleting Volumes

    • Replication Prepare. If the system is licensed to use remote replication and you want to use this volume as a secondary volume, select this option. Selecting this option disables the Map option. • Map. Select this option to change the default mapping for the volume: •...

  • Page 63: Explicitly Mapping Multiple Volumes

    In the main panel, select the volumes to change. To select up to 100 items or clear all selections, toggle the checkbox in the heading row. In the Maps for Selected Volumes table, select the host to change access for. Select Map. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 64: Changing A Volume's Default Mapping

    Either: • Map the volumes to the host by setting a starting LUN, selecting ports, and setting access to read-only or read-write. • Mask the volumes from the host by setting a starting LUN, selecting ports, and setting access to no-access.

  • Page 65: Changing A Volume's Explicit Mappings

    In the Maps for Volume table, select the Explicit mapping to delete. Clear Map. Click Apply. A message specifies whether the change succeeded or failed. Click OK. The mapping returns to the Default mapping. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 66: Unmapping Volumes

    Unmapping volumes You can delete all of the default and explicit mappings for multiple volumes. CAUTION: Volume mapping changes take effect immediately. Make changes that limit access to volumes when the volumes are not in use. Before changing a volume’s LUN, be sure to unmount/unpresent/unmap the volume.

  • Page 67: Creating A Snapshot

    When you delete a snapshot, all data uniquely associated with that snapshot is deleted and associated space in the snap pool is freed for use. Snapshots can be deleted in any order, irrespective of the order in which they were created. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 68: Resetting A Snapshot

    CAUTION: Deleting a snapshot removes its mappings and schedules and deletes its data. CAUTION: If a replication snapshot’s type is shown as a “sync point” for its replication set, consider carefully whether you want to delete that snapshot. If you delete the current sync point, then if a replication-set failure occurs, a prior sync point will be used.

  • Page 69: Creating A Volume Copy

    Click Copy the Volume. A confirmation dialog appears. Click Yes to continue; otherwise, click No. If you clicked Yes and With Modified Data is selected and the snapshot has modified data, a second confirmation dialog appears. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 70: Aborting A Volume Copy

    Click Yes to continue; otherwise, click No. If you clicked Yes, the volume copy operation starts. While the operation is in progress, the destination volume is offline and its type is shown as “standard*”. If you unmounted/unpresented/unmapped a snapshot to copy its modified data, wait until processing is complete before you remount/re-present/remap it.

  • Page 71: Creating A Snap Pool

    • Size. Optionally change the default size, which is all free space in the vdisk. The supported minimum size is 5.37 GB. The recommended minimum size is 6 GB. Click Create Snap Pool If the task succeeds, the new snap pool appears in the Configuration View panel. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 72: Deleting Snap Pools

    Deleting snap pools Before you can delete a snap pool you must delete any associated snapshots, and either delete the associated master volume or convert the master volume to a standard volume. To delete snap pools Verify that no master volume or snapshots are associated with the snap pool. In the Configuration View panel, either: •...

  • Page 73: Changing A Host's Name Or Profile

    Select Map. Set the LUN and select the ports and access type. Click Apply. A message specifies whether the change succeeded or failed. Click OK. The mapping becomes Explicit with the new settings. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 74: Configuring Chap

    To modify an explicit mapping In the Maps for Host table, select the Explicit mapping to change. Set the LUN and select the ports and access type. Click Apply. A message specifies whether the change succeeded or failed. Click OK. The mapping settings are updated. To delete an explicit mapping In the Maps for Host table, select the Explicit mapping to delete.

  • Page 75: Modifying A Schedule

    Click Yes to continue; otherwise, click No. If you clicked Yes, a processing dialog appears. If the task succeeds, the schedules are removed from the table and from the Configuration View panel. When processing is complete a success dialog appears. Click OK. HP P2000 G3 MSA System SMU Reference Guide...
  • Page 76 Provisioning the system...

  • Page 77: Using System Tools

    You can update the firmware in each controller module by loading a firmware file obtained from the HP web download site, http://www.hp.com/go/p2000. To install an HP ROM Flash Component or firmware Smart Component, follow the instructions on the HP web site; otherwise, to install a firmware binary file, follow the steps below.

  • Page 78: Updating Expansion-Module Firmware

    (EMP) to be updated. This typically takes 2.5 minutes for each EMP in a P2000 drive enclosure or 3 minutes for each EMP in an MSA2000 drive enclosure. EMPs in D2700 or MSA70 drive enclosures must be updated separately.

  • Page 79: Updating Disk Firmware

    You can update disk firmware by loading a firmware file obtained from the HP web download site, http://www.hp.com/go/p2000. To install an HP ROM Flash Component or firmware Smart Component, follow the instructions on the HP web site; otherwise, to install a firmware binary file, follow the steps below.

  • Page 80: Saving Logs

    Saving logs To help service personnel diagnose a system problem, you might be asked to provide system log data. Using SMU, you can save log data to a compressed zip file. The file will contain the following data: • Device status summary, which includes basic status and configuration data for the system •...

  • Page 81: Resetting A Host Port

    The following situations cause a disk to become a leftover: • Vdisk members’ timestamps do not match so the system designates members having an older timestamp as leftovers. • A disk is not detected during a rescan, then is subsequently detected. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 82: Restarting Or Shutting Down Controllers

    When a disk becomes a leftover, the following changes occur: • The disk’s health becomes Degraded and its How Used state becomes LEFTOVR. • The disk is automatically excluded from the vdisk, causing the vdisk’s health to become Degraded or Fault, depending on the RAID level.

  • Page 83: Shutting Down

    Expansion can take hours or days to complete, depending on the vdisk’s RAID level and size, disk speed, utility priority, and other processes running on the storage system. You can stop expansion only by deleting the vdisk. Before starting a vdisk expansion, read the white paper “HP P2000 G3 MSA Best Practices” at http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-2141ENW.pdf.

  • Page 84: Verifying A Vdisk

    Before expanding a vdisk Back up the vdisk’s data so that if you need to stop expansion and delete the vdisk, you can move the data into a new, larger vdisk. To expand a vdisk In the Configuration View panel, right-click a vdisk and select Tools > Expand Vdisk. Information appears about the selected vdisk and all disks in the system.

  • Page 85: Removing A Vdisk From Quarantine

    QTCR or QTDN. • A vdisk running I/O loses redundancy plus one more disk. The vdisk will be automatically dequarantined if the vdisk’s status is QTCR or QTDN. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 86: Expanding A Snap Pool

    A vdisk is dequarantined when it is brought back online, which can occur in three ways: • If the missing disks come online, making the vdisk FTOL, the vdisk is automatically dequarantined. • If after 60 seconds from being quarantined the vdisk is QTCR or QTDN, the vdisk is automatically dequarantined.

  • Page 87: Checking Links To A Remote System

    The ID of each linked port in the local system To check links in the local system In the Configuration View panel, right-click the local system and select Tools > Check Local System Link. Click Check Links. HP P2000 G3 MSA System SMU Reference Guide...
  • Page 88 Using system tools...

  • Page 89: Viewing System Status

    Status values are described in the vdisk properties section of Viewing information about a vdisk on page 92. Volume properties When you select the Volumes component a table shows each volume’s name, serial number, size, and vdisk name. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 90: Snap-Pool Properties

    Snap-pool properties When you select the Snap Pools component a table shows each snap pool’s name, serial number, size, free space, master volumes, snapshots, and vdisk name. Snapshot properties When you select the Snapshots component a table shows each snapshot’s name, serial number, source volume, snap-pool name, amounts of snap data, unique data, and shared data, and vdisk name.

  • Page 91: Viewing Information About All Vdisks

    N/A. Health is not available. • Name. Vdisk name. • Size. Total storage space in the vdisk. • Free. Available space in the vdisk. • RAID. RAID level of the vdisk and all of its volumes. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 92: Viewing Information About A Vdisk

    • Status. • CRIT: Critical. The vdisk is online but isn’t fault tolerant because some of its disks are down. • FTDN: Fault tolerant with down disks. The vdisk is online and fault tolerant, but some of its disks are down.

  • Page 93: Disk Properties

    Disk Type. SAS (dual port), SAS-S (single port), SATA (dual port), or SATA-S (single port). • Disks. Quantity of disks in the vdisk or sub-vdisk. • Size. Total capacity of the disks in the vdisk or sub-vdisk. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 94: Volume Properties

    The enclosure view table has two tabs. The Tabular tab shows: • Health. Shows whether the disk is healthy or has a problem. OK. The disk is operating normally. Fault. The disk has failed. Degraded. The disk’s operation is degraded. If you find no related event in the event log, this may indicate a hardware problem.

  • Page 95: Viewing Information About A Volume

    For the selected schedule, two tables appear. The Schedule Details table shows: • Schedule Name. Schedule name. • Schedule Specification. The schedule’s start time and recurrence or constraint settings. • Status. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 96: Viewing Information About A Snapshot

    • Uninitialized: Schedule is not yet ready to run. • Ready: Schedule is ready to run. • Suspended: Schedule is suspended. • Expired: Schedule has expired. • Invalid: Schedule is invalid. • Next Time. The Task Details table shows different properties depending on the task type. Properties shown for all task types are: •...

  • Page 97: Snapshot Properties

    Ports. Controller host ports through which the volume is mapped to the host. • LUN. Volume identifier presented to the host. • Access. Volume access type: read-write, read-only, no-access (masked), or not-mapped. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 98: Schedule Properties

    Schedule properties If any schedules exist for the snapshot, when you select the Schedules component, the Schedules table shows information about each schedule. For the selected schedule, the Schedule Details table shows: • Schedule Name. • Schedule Specification. • Schedule Status. •...

  • Page 99: Volume Properties

    • Standard: LUN 0 can be assigned to a mapping. • HP-UX: LUN 0 can be assigned to a mapping and the host uses Flat Space Addressing. • OpenVMS: LUN 0 cannot be assigned to a mapping. HP P2000 G3 MSA System SMU Reference Guide...

  • Page 100: Viewing Information About A Host

    Viewing information about a host In the Configuration View panel, right-click a host and select View > Overview. The Host Overview table shows: • Host properties • The quantity of mappings for the host Select a component to see more information about it. Host properties When you select the Host component, the Properties for Host table shows: •...

  • Page 101: Disk Properties

    For disk and midplane types where this processor also controls power to the disk, power-on failure will result in Error status. • Error: The disk is present but is not detected by the expander. HP P2000 G3 MSA System SMU Reference Guide 101...

  • Page 102: Power Supply Properties

    Transfer Rate. The data transfer rate in Gbit per second. Some 6-Gbps disks might not consistently support a 6-Gbps transfer rate. If this happens, the P2000 controller automatically adjusts transfers to those disks to 3 Gbps, increasing reliability and reducing error messages with little impact on system performance.

  • Page 103: Fan Properties

    When you select a network port, a table shows: • Health. OK. The port is operating normally. Degraded. The port’s operation is degraded. Fault. The port has failed. N/A. Health is not available. • Health Reason. HP P2000 G3 MSA System SMU Reference Guide 103...

  • Page 104: Controller Module: Host Port Properties

    • MAC Address. • Addressing Mode. • IP Address. • Gateway. • Subnet Mask. Controller module: host port properties When you select a host port, a table shows: • Health. OK. The port is operating normally. Degraded. The port’s operation is degraded. Fault.

  • Page 105: Drive Enclosure: I/O Module Properties

    • Information such as the system name, location, and status that is read from the remote system. To sign in to the remote system, click one of its IP address links. HP P2000 G3 MSA System SMU Reference Guide 105...
  • Page 106 106 Viewing system status...

  • Page 107: Using Remote Snap To Replicate Volumes

    The host in Munich is mapped to and updates the Sales and Engineering volumes. The Sales volume is replicated from System 2 to System 3 in the Munich DATA center. The Engineering volume is replicated from System 3 in Munich to System 1 in New York. HP P2000 G3 MSA System SMU Reference Guide 107...

  • Page 108: Intersite And Intrasite Replication Sets

    Figure 4 Intersite and intrasite replication sets Remote replication uses snapshot functionality to track the data to be replicated and to determine the differences in data updated on the master volume, minimizing the amount of data to be transferred. Snapshots created by the remote replication process are a special form called replication snapshots, which do not count against snapshot license limits.

  • Page 109: Replication Actions

    When the initial replication is complete, the second complete. replication automatically starts. Only the data changed since Snap 1 is replicated. Figure 5 Actions that occur during a series of replications HP P2000 G3 MSA System SMU Reference Guide 109...

  • Page 110: Performing Initial Replication Locally Or Remotely

    The figure above illustrates initial, delta, and queued replications: • Initial replication: When the first replication is initiated, a snapshot of the primary volume is taken and every block of data is then copied to the secondary volume. When the copy is complete, the first snapshot is taken on the secondary volume, creating the first sync point.

  • Page 111: Remote Replication Disaster Recovery

    For example, you could use host file-system tools to find any files modified since a certain time, or for a database you could export any differing records from the snapshot and re-enter them into the current database. HP P2000 G3 MSA System SMU Reference Guide 111...

  • Page 112: Remote Replication Licensing

    Remote replication licensing The Remote Replication and Snapshot features are separately licensed. Remote replication can operate without Snapshot being enabled; however, to get the most out of remote replication, it is recommended to enable both features. Normally, replication snapshots are not accessible to hosts. However, if Snapshot is enabled, a replication snapshot can be exported for use as a standard snapshot.

  • Page 113: Step 1: Starting The Wizard

    Click Next to continue. If there are no links to the remote system, a message appears and you cannot proceed. For a combo system, if only one link type is up, only that link type will appear in the next step. HP P2000 G3 MSA System SMU Reference Guide 113...

  • Page 114: Step 4: Selecting The Secondary Volume

    Step 4: Selecting the secondary volume Specify the secondary volume. You can select an existing replication-prepared volume or specify to create a volume in an existing vdisk that has sufficient available space for the replicated data. If no existing volumes are appropriate to use, the Secondary Volume options will be grayed out but you can still select a vdisk.
  • Page 115 If you do not want to start or schedule replication, clear the Initiate Replication checkbox. The replication set will still be created and you can replicate the volume at a later time. HP P2000 G3 MSA System SMU Reference Guide 115...

  • Page 116: Replicating A Snapshot

    Click Apply. Within a couple of minutes, the replication set is created and the following changes occur in the Configuration View panel: • Under the primary vdisk: • The selected primary volume changes to a master volume, and is designated as a Primary Volume.

  • Page 117: Suspending Replication

    The process to move a secondary volume is: In the system where the secondary volume resides: a. Detach the secondary volume. b. If the secondary volume’s vdisk contains other secondary volumes, detach those volumes. HP P2000 G3 MSA System SMU Reference Guide 117...

  • Page 118: Stopping A Vdisk

    c. Stop the secondary volume’s vdisk. For details see Stopping a vdisk on page 1 18. d. If the secondary volumes’ snap pools are in other vdisks, stop those vdisks. e. Move the vdisks into the secondary system. In the secondary system: a.

  • Page 119: Starting A Vdisk

    Stop the secondary volume’s vdisk. For details see Stopping a vdisk on page 1 18. d. If the secondary volumes’ snap pools are in other vdisks, stop those vdisks. e. Move the vdisks into the secondary system. HP P2000 G3 MSA System SMU Reference Guide 119...

  • Page 120: Exporting A Replication Image To A Snapshot

    In the secondary system: a. Start the snap pools’ vdisks. For details see Starting a vdisk on page 1 19. b. Start the secondary volumes’ vdisks. c. Reattach the secondary volumes. To reattach a secondary volume In the Configuration View panel, right-click the secondary volume and select Provisioning > Reattach Replication Volume.

  • Page 121: Viewing Replication Properties, Addresses, And Images For A Volume

    The quantity of replication images for the volume For descriptions of storage-space color codes, see About storage-space color codes on page 33. Select a component to see more information about it. HP P2000 G3 MSA System SMU Reference Guide 121...

  • Page 122: Replication Properties

    Replication properties For a local primary or secondary volume, the Replication Properties for Volume table also shows: • Name. Replication volume name. • Serial Number. Replication volume serial number. • Status. Replication volume status: Replicating, Suspended, Initializing, Inconsistent, Offline, Online, or Establishing proxy.

  • Page 123: Replication Images

    In the Configuration View panel, right-click a replication image and select View > Overview. The Replication Image Overview table shows: • Replication status properties • Primary volume snapshot properties • Secondary volume snapshot properties Select a component to see more information about it. HP P2000 G3 MSA System SMU Reference Guide 123...

  • Page 124: Replication Status Properties

    Replication status properties When you select the Status component a table shows the status, progress, start date/time, date/time of last update, date/time the replication was suspended, estimated completion time, elapsed or total replication time (including any suspension time). The panel also shows the replication image’s serial number. Primary volume snapshot properties If the snapshot is on the local system, when you select the Primary Volume Snapshot component a table shows the:...

  • Page 125: Asnmp Reference

    The system object identifier (sysObjectID) is based on the vendor name followed by “.2.” and the identifier for the particular product model. For example, the object identifier for P2000 G3 MSA Systems is 1.3.6.1.4.1.1 1.2.51, where 51 is assigned for hpMSA. System uptime is an offset from the first time this object is read.

  • Page 126: Fa Mib 2.2 Snmp Behavior

    The traps section is not supported. It has been replaced by an ability to configure trap destinations using the CLI or SMU. The statistics section is not implemented. The following table lists the MIB objects, their descriptions and the value set in a P2000 G3 MSA System. Unless specified otherwise, objects are not settable.
  • Page 127 Settable: Display string containing Default: Uninitialized Info connUnitInfo information about this connectivity unit Not supported invalid(2) for an SNMP GET connUnitControl operation and not settable through an SNMP SET operation. HP P2000 G3 MSA System SMU Reference Guide 127...
  • Page 128 Table 1 1 FA MIB 2.2 objects, descriptions, and values (continued) Object Description Value Settable: Contact information for this Default: Uninitialized Contact connUnitContact connectivity unit Settable: Location information for this Default: Uninitialized Location connUnitLocation connectivity unit Defines the event severity that will be Default: info(8) connUnitEventFilter logged by this connectivity unit.
  • Page 129 String describing the addressed port External details for connUnitPortName connUnitPortTable on page 133 Port number represented on the Port number represented on the connUnitPortPhysical hardware hardware Number Not supported 0 (No statistics available) connUnitPortStatObject HP P2000 G3 MSA System SMU Reference Guide 129...
  • Page 130 Table 1 1 FA MIB 2.2 objects, descriptions, and values (continued) Object Description Value Includes the following objects as specified by the FA MIB2.2 Spec connUnitEventTable connUnitId of the connectivity unit Same as connUnitId connUnitEventUnitId that contains this port Index into the connectivity unit’s Starts at 1 every time there is a table connUnitEventIndex event buffer, incremented for each...

  • Page 131: External Details For Certain Fa Mib 2.2 Objects

    Firmware revision for Management Controller (Controller A) Firmware revision for Management Controller (Controller B) Firmware revision for MC loader (Controller A) Firmware revision for MC loader (Controller B) Firmware Revision for Unified CPLD (Controller A) HP P2000 G3 MSA System SMU Reference Guide 131...

  • Page 132: External Details For Connunitsensortable

    Table 12 connUnitRevsTable index and description values connUnitRevsIndex connUnitRevsDescription Firmware Revision for Unified CPLD (Controller B) Firmware Revision for Expander (Controller A) Firmware Revision for Expander (Controller B) Hardware Revision for Controller A Hardware Revision for Controller B External details for connUnitSensorTable Table 13 connUnitSensorTable index, name, type, and characteristic values connUnitSensorIndex connUnitSensorName...

  • Page 133: External Details For Connunitporttable

    MIBs, configuring events, and viewing and setting group objects. In order to view and set system group objects, SNMP must be enabled in the storage system; see Changing management interface settings on page 40. HP P2000 G3 MSA System SMU Reference Guide 133...

  • Page 134: Enterprise Trap Mib

    Enterprise trap MIB The following pages show the source for the HP enterprise traps MIB, msa2000traps.mib. This MIB defines the content of the SNMP traps that P2000 G3 MSA Systems generate. -- ---------------------------------------------------------------------------- -- MSA2000 Array MIB for SNMP Traps -- $Revision: 11692 $ -- Copyright (c) 2008 Hewlett-Packard Development Company, L.P.
  • Page 135 Recommended severity level (for filtering): critical" -- Trap annotations are as follows: --#TYPE "Critical storage event" --#SUMMARY "Critical storage event # %d, type %d, description: %s" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 6 ::= 3004 HP P2000 G3 MSA System SMU Reference Guide 135...

  • Page 136: Fa Mib 2.2 And 4.0 Differences

    FA MIB 2.2 and 4.0 differences FA MIB 2.2 is a subset of FA MIB 4.0. Therefore, SNMP elements implemented in P2000 G3 MSA Systems can be accessed by a management application that uses FA MIB 4.0. The following tables are not implemented in 2.2: •...

  • Page 137: B Using Ftp To Download Logs And Update Firmware

    Wait for the message Operation Complete to appear. Quit the FTP session. If the problem to diagnose seems specific to user-interface behavior, repeat step 3 through step 6 the partner controller to collect its unique MC log data. HP P2000 G3 MSA System SMU Reference Guide 137...

  • Page 138: Updating Firmware

    You can update the firmware in each controller module by loading a firmware file obtained from the HP web download site, http://www.hp.com/go/p2000. To install an HP ROM Flash Component or firmware Smart Component, follow the instructions on the HP web site; otherwise, to install a firmware binary file, follow the steps below.

  • Page 139: Updating Expansion-Module Firmware

    (EMP) to be updated. This typically takes 2.5 minutes for an EMP in each P2000 drive enclosure or 3 minutes for an EMP in each MSA2000 drive enclosure. Expansion modules in D2700 or MSA70 drive enclosures must be updated separately.
  • Page 140 It typically takes 2.5 minutes to update each EMP in a D2700 drive enclosure, 6.5 minutes to update each EMP in an MSA70 drive enclosure, 2.5 minutes to update each EMP in a P2000 drive enclosure, or 1.5 minutes to update each EMP in an MSA2000 drive enclosure. Wait for a message that the code load has completed.

  • Page 141: Updating Disk Firmware

    You can update disk firmware by loading a firmware file obtained from the HP web download site, http://www.hp.com/go/p2000. To install an HP ROM Flash Component or firmware Smart Component, follow the instructions on the HP web site; otherwise, to install a firmware binary file, follow the steps below.

  • Page 142: Installing A License File

    CAUTION: Do not power cycle enclosures or restart a controller during the firmware update. If the update is interrupted or there is a power failure, the disk might become inoperative. If this occurs, contact technical support. It typically takes several minutes for the firmware to load. Wait for a message that the update has succeeded.

  • Page 143: C Using Smi-S

    Using SMI-S This appendix provides information for network administrators who are managing the P2000 G3 MSA System from a storage management application through the Storage Management Initiative Specification (SMI-S). SMI-S is a Storage Networking Industry Association (SNIA) standard that enables interoperable management for storage networks and storage devices.

  • Page 144: Smi-S Implementation

    About the P2000 G3 MSA System SMI-S provider The P2000 G3 MSA System SMI-S provider is a full-fledged embedded provider implemented in the firmware. It provides an industry-standard WBEM-based management framework. SMI-S clients can interact with this embedded provider directly and do not need an intermediate proxy provider.

  • Page 145: Smi-S Profiles

    Describes an enclosure that contains storage elements (e.g., disk or tape drives) and enclosure elements (e.g., fans and power supplies). Multiple Computer System Models multiple systems that cooperate to present a “virtual” computer system with additional capabilities or redundancy. HP P2000 G3 MSA System SMU Reference Guide 145...

  • Page 146: Cim Alerts

    CIM Alerts Table 16 CIM Alert indication events FRU/Event category Corresponding SMI-S class Operational status values that would trigger alert conditions Controller HP_Controller Down, Not Installed, OK Hard Disk Drive HP_DiskDrive Unknown, Missing, Error, Degraded, OK HP_PSUFan Error, Stopped, OK Power Supply HP_PSU Unknown, Error, Other, Stressed, Degraded, OK...

  • Page 147: Frequently Asked Questions

    SNIA requires that the providers pass the Conformance Test Program (CTP) tests. What storage arrays are supported? Each P2000 G3 MSA System is supported, including FC, iSCSI, SAS and Hybrid platforms. The classes for HP are HP_XXX. The device namespace for HP is /root/hpq.

  • Page 148: What's New In This Release

    What’s new in this release? SMI-S 1.3 Array Provider support introduced in T230 (passes 100% CTP 1.3 tests): • Support for Block Server Performance subprofile • 20x-30x performance improvements • HP SIM 6.3 subscribe to WBEM events functionality is supported (TS230 and above) Fixed removal of indication subscription •...

  • Page 149: Troubleshooting

    Alert Indications The implementation of alert indications allow a subscribing CIM client to receive events such as FC cable connects, Power Supply events, Fan events, Temperature Sensor events and Disk Drive events. HP P2000 G3 MSA System SMU Reference Guide 149...

  • Page 150: Full Provisioning

    Full provisioning We currently do not have a create vdisk implementation in the provider. Full provisioning will be modeled in the provider by the Block Services and Masking & Mapping subprofiles. Replication support We currently do not have a replication implementation in the provider. Replication will be modeled in the provider by the Copy Services and Replication Services subprofiles in a SMI-S 1.5 provider.

  • Page 151: Glossary

    Volume-mapping settings that specify no access to that volume by hosts. See also default mapping and explicit mapping. master volume A volume that is enabled for snapshots and has an associated snap pool. HP P2000 G3 MSA System SMU Reference Guide 151...
  • Page 152 Management Controller. The processor (located in a controller module) that is responsible for human-computer interface and computer-computer interface functions, and interacts with the SC. metadata Data in the first sectors of a disk drive that stores all disk, vdisk, and volume specific information including vdisk membership or spare identification, vdisk ownership, volumes and snapshots in the vdisk, host mapping of volumes, and results of the last media scrub.
  • Page 153 WWNN World Wide Node Name. A globally unique 64-bit number that identifies a node process. WWPN World Wide Port Name. A globally unique 64-bit number that identifies a node port. HP P2000 G3 MSA System SMU Reference Guide 153...
  • Page 154 154 Glossary...

  • Page 155: Index

    FTP to update firmware EMP polling rate using WBI to update firmware configuring conventions enclosure document properties Coordinated Universal Time (UTC) viewing information about current owner enclosure properties HP P2000 G3 MSA System SMU Reference Guide 155...
  • Page 156 event log host ports viewing check links in local system event notification check links to remote system configuring email settings configuring configuring SNMP settings configuring with Configuration Wizard configuring with Configuration Wizard resetting sending a test message hosts event severity icons about expansion module properties removing...
  • Page 157 SCSI SYNCHRONIZE CACHE command configuring handling of secondary volume quarantined vdisk detaching reattaching selective storage presentation RAID levels See volume mapping about shared data (snapshot) shutting down controllers HP P2000 G3 MSA System SMU Reference Guide 157...
  • Page 158 sign out, auto storage system setting user See system viewing remaining time Subscriber’s choice, HP signing in to the WBI synchronize-cache mode signing out of the WBI configuring single-controller system system data protection tips configuration limits size representations data protection tips for a single-controller about properties replication snapshot...
  • Page 159 HP P2000 G3 MSA System SMU Reference Guide 159...
  • Page 160 160 Index...

This manual is also suitable for:

P2000 g3

Table of Contents

Save PDF