2.6.3
Hard Disk Drives
1. 2nd SATA-S: XXXXXXXXX
1. 2nd SATA-S; xxxxxxxx
Allows you to assign a hard disk drive attached to the system.
2.6.4
Boot Settings Configuration
Quick Boot
Boot Up Floppy Seek
Bootup Num-Lock
Typematic Rate Setting
x
Typematic Rate (Chars/Sec)
x
Typematic Delay (Msec)
Full Screen LOGO
Halt On
F1:Help
ESC: Exit
Quick Boot [Enabled]
Allows you to enable or disable the system quick boot feature. When Enabled,
the system skips certain tests while booting. Configuration options: [Disabled]
[Enabled]
Boot Up Floppy Seek [Disabled]
Enables or disables the chassis open status feature. Setting to Enabled, clears the
chassis open status. Configuration options: [Disabled] [Enabled]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
2-34
Phoenix-Award BIOS CMOS Setup Utility
Boot
Hard Disk Drives
Phoenix-Award BIOS CMOS Setup Utility
Boot
Boot Settings Configuration
↑↓ : Select Item
→←: Select Menu
[Enabled]
[Disabled]
[On]
[Disabled]
6
250
[Enabled]
[All Errors]
-/+: Change Value
Enter: Select SubMenu
Select Menu
Item Specific Help
Select Menu
Item Specific Help
Press [Enter] to
enable or disable.
F5: Setup Defaults
F10: Save and Exit
Chapter 2: BIOS setup