Brother BAS-342G PS Instruction Manual page 69
Direct drive programmable electronic pattern sewer, "perfect stitch"
Hide thumbs
Also See for BAS-342G PS:
- Service manual (153 pages) ,
- Manual de instrucciones (86 pages) ,
- Instruction manual (84 pages)
Table of Contents
Advertisement
2910B
2913B
7. Turn the pulley (1) by hand to move the needle bar to its lowest position.
8. Loosen the nut (10) until the thread trimmer roller (3) is within the groove in the thread trimmer cam (4). After this, tighten
the set screw (11) until the thread trimmer roller (3) is touching the inside of the groove in the thread trimmer cam (4) and
then turn it back in the counterclockwise direction by approximately 1/4 of a turn. Then tighten the nut (10).
13. Loosen the nut (10) once more, and then turn the set screw (11) a further 1/4 of a turn in the counterclockwise direction.
14. Tighten the nut (10), and then check that the collar (3) is not touching the inside of the groove in the thread trimmer cam
(4). In addition, push the driving lever (5) by hand toward the thread trimmer cam (4) until the collar (3) touches the
groove of the thread trimmer cam (4), and then check that the driving lever (5) returns smoothly to its original position
when it is released.
15. Turn off the power switch.
9. While pressing the
* After the model name is displayed, keep pressing the
key (12) until the buzzer sounds.
The check code will appear in the PROGRAM No.
display (13), and the abbreviation for the output name
will appear in the menu display (14).
10. Press the
code 57.
* Refer to the Service Manual for details on other
check codes.
11. Press the
cylinder (18).
* If you press the
cylinder (18) will turn off.
12. While the thread trimming air cylinder (18) is turned on,
loosen the nut (20) and adjust the position of the thread
trimming bar (19) so that the clearance between the
thread trimming bar (19) and the driving lever (5) is 0.1
2912B
to 0.2 mm.
BAS-342G PS
11. STANDARD ADJUSTMENTS
key (12), turn on the power switch.
key (15) or the
key (12) to select check
key (16) to turn on the thread trimming air
key (17), the thread trimming air
(Continued on next page)
2911B
60
- Quick Links:
- Table of Error Codes
Hide quick links:
Advertisement
Table of Contents
