Adjusting Arm Thread Guide R; Adjusting The Needle Bar Height - Brother BAS-342G PS Instruction Manual

Direct drive programmable electronic pattern sewer, "perfect stitch"

Hide thumbs Also See for BAS-342G PS:

Table of Contents

11-2. Adjusting arm thread guide R

More thread

2552Q

Turn the machine pulley to move the needle bar to the lowest position. Then remove the rubber plug (2), loosen the screw

(3) and then move the needle bar up or down to adjust so that the second reference line from the bottom of the needle bar

(reference line A) is aligned with the lower edge of the needle bar bush (1).

* If using a DP X 5 needle, use the highest reference line (reference line a).

The standard position of arm thread guide R (1) is when the

screw (2) is aligned with the index mark.

Loosen the screw (2) and move arm thread guide R (1) to

adjust.

Less thread

* When sewing heavy material, move arm thread guide R

(1) to the left. (The thread take-up amount will become

greater.)

* When sewing light material, move arm thread guide R

(1) to the right. (The thread take-up amount will become

Index mark

less.)

2588B

BAS-342G PS

11. STANDARD ADJUSTMENTS

2582B

Table of Contents

Show Quick Links

Table of Contents