Adjusting The Work Clamp Lift Amount; Adjusting The Air Pressure - Brother BAS-342G PS Instruction Manual

Direct drive programmable electronic pattern sewer, "perfect stitch"

Hide thumbs Also See for BAS-342G PS:

Table of Contents

11-14. Adjusting the work clamp lift amount

The maximum lift amount for the work clamp (2) is 30 mm above the top of the needle plate.

5018Q

1. Turn on the air, and then turn on the power switch.

2. Depress the work clamp switch (1) to raise the work clamp (2).

3. Loosen the two bolts (4) of the work clamp lifter lever (3), and then move the work clamp lifter lever (3) up or down to

adjust the lift amount.

Lift up the handle (2) of the regulator (1) and then turn it to

adjust the air pressure to 0.5 MPa.

After adjustment is complete, push the handle (2)

downward to lock it.

2748B

BAS-342G PS

11. STANDARD ADJUSTMENTS

Max. 30mm

4052M

Table of Contents

Show Quick Links

Table of Contents