Writing All Sewing Data To The Cf Card At Once - Brother BAS-342G PS Instruction Manual
Direct drive programmable electronic pattern sewer, "perfect stitch"
Hide thumbs
Also See for BAS-342G PS:
- Service manual (153 pages) ,
- Manual de instrucciones (86 pages) ,
- Instruction manual (84 pages)
Table of Contents
Advertisement
8-3-2. Writing all sewing data to the CF card at once
1
2
3
4
End data read/write mode
Refer to the service manual for details on other read/write modes.
Writing
TEST indicator switches off
BAS-342G PS
Select the [w 2] data read/write mode.
Press the R/W key.
• [SEd-] will change to [ ALL].
* If you press the
or
numbers that you would like to write and then continue
to carry out the following procedure, you can write the
selected sewing data in separate lots.
Press the R/W key.
• The buzzer will sound and the all sewing data will be
copied from the internal memory onto the CF card.
• The program numbers that have been written will
appear in the menu display.
* If there is a large volume of data in the internal
memory, it will take some time for all of it to be written.
To halt the writing of data, press the STOP switch. If
you then press the RESET key, the display will change
back to [ ALL].
Press the TEST key.
Turn off the power switch, remove the CF card, and then
close the cover of the CF slot.
8. USING CF CARDS
4578Q
key to select the program
4577Q
4977Q
50
- Quick Links:
- Table of Error Codes
Hide quick links:
Advertisement
Table of Contents
