Reading All Sewing Data From The Cf Card At Once - Brother BAS-342G PS Instruction Manual

Direct drive programmable electronic pattern sewer, "perfect stitch"

Hide thumbs Also See for BAS-342G PS:

Table of Contents

8. USING CF CARDS

8-3-1. Reading all sewing data from the CF card at once

End data read/write mode

TEST indicator switches off

BAS-342G PS

Select the [r 1] data read/write mode.

Press the R/W key.

• [-SEd] will change to [ ALL].

* If you press the

numbers that you would like to read and then continue

to carry out the following procedure, you can read the

selected sewing data in separate lots.

Press the R/W key.

• The buzzer will sound and all sewing data will be

loaded from the CF card and copied into the sewing

machine's internal memory.

• The program numbers that have been read will appear

in the menu display.

* If there is a large volume of data in the CF card, it will

take some time for all of it to be read. To halt the

reading of data, press the STOP switch. If you then

press the RESET key, the display will change back to

[ ALL].

Press the TEST key.

Turn off the power switch, remove the CF card, and then

close the cover of the CF slot.

4576Q

key to select the program

4577Q

4976Q

Table of Contents

Show Quick Links

Table of Contents