Direct Selection (Combination Table) - Brother BAS-342G PS Instruction Manual
Direct drive programmable electronic pattern sewer, "perfect stitch"
Hide thumbs
Also See for BAS-342G PS:
- Service manual (153 pages) ,
- Manual de instrucciones (86 pages) ,
- Instruction manual (84 pages)
Table of Contents
Advertisement
<Clearing method>
1
TEST indicator illuminates, MENU indicator flashes
2
3
NOTE: If you clear all user programs after any cycle programs have been recorded, all recorded cycle programs will
also be cleared.
7-9. Direct selection (combination table)
You can use the function keys to directly select user program numbers and cycle program numbers.
U1 to U4 and C-1 to C-4 can be selected using function keys F1 to F4.
U5 to U10 and C-5 to C-9 can be selected by simultaneously pressing combinations of function keys F1 to F4 (addition).
U5/C-5
Or
U8/C-8
7. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
MENU indicator switches off
Press the RESET key.
• The buzzer will sound and the cycle program with the number selected will
be cleared.
Clearing all cycle programs
Press and hold the RESET key for 2 seconds or more.
•
The buzzer will sound and the all cycle programs will be cleared.
U6/C-6
Or
U9/C-9
BAS-342G PS
While pressing the TEST key, press the SELECT key.
• Switch to user program recording mode. Check that
the menu indicators are flashing.
Press a function key from F1 to F4.
• Switch to cycle program recording mode.
Press the function key (F1 to F4) or press the
key to select the cycle program number to clear.
4970Q
or
4450Q
U7/C-7
Or
U10
44
- Quick Links:
- Table of Error Codes
Hide quick links:
Advertisement
Table of Contents
