Using User Programs - Brother BAS-342G PS Instruction Manual
Direct drive programmable electronic pattern sewer, "perfect stitch"
Hide thumbs
Also See for BAS-342G PS:
- Service manual (153 pages) ,
- Manual de instrucciones (86 pages) ,
- Instruction manual (84 pages)
Table of Contents
Advertisement
7. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
7-7. Using user programs
Up to 50 different combinations of settings including program no., X-scale, Y-scale, sewing speed and intermittent presser
foot height can be memorized as user programs (U1 to U50).
If you are sewing certain patterns over and over again, it is useful to record the settings for these patterns into a user
program.
User programs are enabled when memory switch no. 400 is set to "ON".
<Recording user programs>
1
Select a user program number.
TEST indicator illuminates, MENU indicator flashes
2
First, set the program number.
3
Next, set the X-scale.
4
Next, set the Y-scale.
39
X-SCALE indicator flashes
Y-SCALE indicator flashes
BAS-342G PS
While pressing the TEST key, press the SELECT key.
• Switch to user program recording mode. Check that
the menu indicators are flashing.
• The user program number will appear in the
PROGRAM No. display, and " P- - - " will appear in the
menu display.
or
Press the
key to select the user program
number.
Press the
or
key to set the user program number
to be recorded.
NOTE:
Select a program number that is recorded in the
internal memory. You cannot specify program
numbers on removable media.
Press the SELECT key.
Press the
or
key to set the X-scale to be recorded.
Press the SELECT key.
Press the
or
key to set the Y-scale to be recorded.
4469Q
4966Q
4470Q
4472Q
- Quick Links:
- Table of Error Codes
Hide quick links:
Advertisement
Table of Contents
