List Of Memory Switch Settings - Brother BAS-342G PS Instruction Manual
Direct drive programmable electronic pattern sewer, "perfect stitch"
Hide thumbs
Also See for BAS-342G PS:
- Service manual (153 pages) ,
- Manual de instrucciones (86 pages) ,
- Instruction manual (84 pages)
Table of Contents
Advertisement
7. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
7-3. List of memory switch settings
Setting
No.
range
Work clamp lift timing after sewing is completed
001
OFF
ON
Integrated-type work clamp drop operation
0
002
1
2
Sewing start speed
OFF
100
ON
Single-stitch test feed
OFF
200
ON
Production counter display
300
OFF
ON
User programs
400
OFF
ON
Cycle programs
401
OFF
ON
Maximum reduction ratio (mm display) (*2)
402
OFF
ON
Split mode selection
0
403
1
2
Thread trimming air cylinder operation timing
900
0 − 200
(*1)
The position of the work clamp stopper must be set. (Refer to "5-8. Setting 2-step operation for the work clamp".)
(*2)
The mm display may differ slightly from the actual sewing size.
35
Lifts at the final stitch position.
Lifts after moving to the sewing start position.
Work clamp dropping in one step
Work clamp dropping in two steps (*1)
Do not use this setting.
The sewing speed for the first 1 − 5 stitches is set by memory switch numbers 151
− 155.
(Refer to the service manual for details of memory switch Nos. 151 − 155.)
1st stitch at 400 sti/min, 2nd stitch at 400 sti/min, 3rd stitch at 600 sti/min, 4th
stitch at 900 sti/min, 5th stitch at 2,000 sti/min
Test feed starts when the start switch is depressed, and it continues automatically
until the final stitch.
Test feeding
• Is carried out one stitch at a time each time the work clamp switch is depressed
• Is carried out continuously while the start switch is depressed
• Is carried out one stitch at a time when the pulley is turned by hand
Lower thread counter display
Production counter display
Disabled
User program mode is enabled.
Disabled
When sewing user programs, the set programs are sewn in numeric order.
Displayed as %.
Displayed as mm.
Continuous split (split menu is disabled before split detection)
Continuous split (split menu is always enabled)
Independent split
The larger the value, the more delayed the timing.
Setting items
BAS-342G PS
Initial value
ON
0
OFF
OFF
OFF
OFF
OFF
OFF
0
0
- Quick Links:
- Table of Error Codes
Hide quick links:
Advertisement
Table of Contents
