Configuring VPN
Configuring SSL VPN for Browser-Based Remote Access
STEP 3
STEP 4
STEP 5
Cisco SA 500 Series Security Appliances Administration Guide
•
Available Users: If you chose User as the query type, choose the name from
this list.
•
Click Display to run the query.
To add an SSL VPN policy, click Add.
Other options: Click the Edit button to edit an entry. To delete an entry, check
NOTE
the box and then click Delete. To select all entries, check the box in the first
column of the table heading.
After you click Add or Edit, the SSL VPN Policy Configuration page appears.
In the Policy For area, enter the following information:
•
Policy For: Choose the type of policy: Global, Group, or User. If you choose
Group, also choose the group from the Available Groups list. If you choose
User, also choose the user from the Available Users list.
In the SSL VPN Policy area, enter the following information:
•
Apply Policy to: Choose to apply the policy to a Network Resource, an IP
address, an IP network, or All Addresses that are managed by the device.
Also complete the fields that are highlighted with white backgrounds.
•
Policy Name: Enter a name to identify this policy.
If you create a policy with same name as that of any existing policy, the
NOTE
newly policy overwrites the existing one.
•
IP Address: If you chose IP Address or Network Resource in the Apply
Policy to field, enter the IP address of the device.
•
Mask Length: If you chose IP Network in the Apply Policy to field, enter the
length of the subnet mask.
•
Port Range / Port Number (Begin & End): Specify a port or a range of ports
to apply the policy to all TCP and UDP traffic with those ports. Leave the
fields empty to apply the policy to all traffic.
•
Service: Choose VPN Tunnel, Port Forwarding, or All Services Defined.
8
180