Advertisement
Quick Links
PRODUCT MODEL NUMBER
KBCO24LSBX
KBCO24RSBX
Electrical: 115-Volt, 60-Hz, AC-only 15- or 20-amp fused, grounded electrical
supply is required. It is recommended that a separate circuit serving only your
beverage center be provided. Use an outlet that cannot be turned off by a
switch. Do not use an extension cord.
NOTE: Before performing any type of installation, cleaning or removing a light
bulb, unplug beverage center or disconnect power.
LOCATION REQUIREMENTS
To ensure proper
ventilation for your
beverage center, allow for
a
1
⁄
" (6.35 mm) space on
4
each side and at the top.
When installing your
beverage center next to a
fixed wall, leave 2
1
⁄
"
2
(6.35 cm) minimum
clearance on each side to
allow for the door to swing
open.
NOTE: It is recommended
that you do not install the
beverage center near an
oven, radiator, or other
heat source. Do not install
in a location where the
temperature will fall below
55°F (13°C). For best
performance, do not install
the beverage center behind a cabinet door or block the base grille.
OVERALL DIMENSIONS
BACK VIEW
23
⁄
" (60.33 cm)
3
4
34
(87.31 cm)
Top of
cabinet
TOP VIEW
22"
Top front of
(55.88 cm)
refrigerator
Handle
90˚
(119.38 cm)
Door
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Beverage Center
" (6.35 mm)
2 " (6.35 cm)
SIDE VIEW
26
⁄
" (66.99 cm)
3
8
24
3
3
⁄
"
22" (55.88 cm)
8
35
1
⁄
"
8
(89.22 cm)
Top of
door
hinge
3
⁄
"
3
8
(8.57 cm)
Height to top of cabinet:
34
⁄
" (87.31 cm)
3
8
Height to top of door hinge:
34
3
⁄
" - 35
1
⁄
" (87.31 cm - 89.22 cm)
8
8
Width closed:
23
3
⁄
" (60.33 cm)
4
Depth closed including handle:
26
⁄
" (66.99 cm)
3
8
Depth closed excluding handle:
24
3
⁄
" (61.91 cm)
8
Depth excluding doors:
47"
22" (55.88 cm)
Depth with doors open 90˚:
47" (119.38 cm)
CUSTOM OVERLAY FRAME
If you plan to install a custom overlay frame, you will need to create
the frame yourself or consult a qualified cabinetmaker or carpenter.
See dimension drawings for frame specifications.
IMPORTANT:
The thickness of the overlay frame must be
Overlay frame must not weigh more than 10 lbs (4.54 kg).
Overlay frames weighing more than recommended may cause
damage to your appliance.
Overlay Frame — Rear View
Create the custom overlay frame using the dimensions shown.
1
"
(3.33 cm)
A
1
"
(3.33 cm)
⁄
" (61.91 cm)
8
Install Overlay Hooks
Using a Phillips screwdriver and eight flat-head screws attach the
overlay hooks to the back of the overlay frame.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
4
"
2.95"
(11.2 cm)
(7.5 cm)
2.95"
(7.5 cm)
2 "
(6.4 cm)
23.62"
(60.0 cm)
A. Overlay hook locations
A. Overlay hooks (4)
3
⁄
" (1.91 cm).
4
29 "
(75.88 cm)
A
Ref. 2300277C
3/18/10
Advertisement
