Anytime you note distortion, reduce the volume control on your power amplifier/receiver to a lower setting. Never allow your power amplifier to be driven into “clipping”. Secure placement or installation is the owner’s responsibility. YAMAHA shall not be liable for any accident caused by improper placement or installation of speakers.
INSTALLATION Before installation, check to ensure that the area you are installing the speaker is free of any ceiling joints, by tapping the ceiling or using a stud finder. If you wish to paint the speaker frame and grill, please refer to page 7 “PAINTING THE SPEAKER FRAME AND GRILL”...
Page 5
Note: Connect the speaker cable to the speaker and You can swivel the tweeter to direct high your receiver. Please refer to page 6, frequency sounds precisely toward the listening “CONNECTIONS” section for detailed position by gently pressing the outer edge of the instructions.
CONNECTIONS Connect the push-type input terminals at the rear of the speakers to the speaker output terminals of the receiver. Connect the (+) terminals on the receiver and speakers using the corresponding side of the cable. Connect the (–) terminals on both components using the other side of the cable. Receiver NS-IW480C + –...
PAINTING THE SPEAKER FRAME AND GRILL The speaker frame and grill can be painted to match your room décor. Use high quality spray paint and select a well ventilated area before proceeding. Painting the frame Painting the grill 1 Remove the speaker from the ceiling if it is already 1 Carefully remove the grill from the speaker, if installed.
(6) Labor & materials required to remove and reinstall the loudspeaker. (7) Any unit which has not been purchased by the consumer directly from an authorized YAMAHA dealer in the USA or Puerto Rico. If you are uncertain as to whether a dealer has been authorized by YAMAHA, please contact YAMAHA at the telephone number shown below.