Section 3 - Configuration
If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP
address only to that computer or device.
Note: This IP address must be within the DHCP IP Address Range.
Enable:
Check this box to enable the reservation.
Computer Name:
Enter the computer name or select from the drop-down menu
and click <<.
IP Address:
Enter the IP address you want to assign to the computer or
device. This IP Address must be within the DHCP IP Address
Range.
MAC Address:
Enter the MAC address of the computer or device.
Copy Your PC's
If you want to assign an IP address to the computer you are
MAC Address:
currently on, click this button to populate the fields.
Save:
Click Save to save your entry. You must click Save.Settings at
the top to activate your reservations.
Number of
In this section you can see what LAN devices are currently
Dynamic DHCP
leasing IP addresses.
Clients:
Revoke:
Click Revoke to cancel the lease for a specific LAN device and free an entry in the lease table. Do this only if the device no longer
needs the leased IP address, because, for example, it has been removed from the network.
Note: The Revoke option will not disconnect a PC with a current network session from the network; you would need to use MAC Address Filter
to do that. Revoke will only free up a DHCP Address for the very next requester. If the previous owner is still available, those two devices may
both receive an IP Address Conflict error, or the second device may still not receive an IP Address; in that case, you may still need to extend
the "DHCP IP Address Range" to address the issue which is located in the DHCP Server section.
Reserve:
The Reserve option converts this dynamic IP allocation into a DHCP Reservation and adds the corresponding entry to the DHCP
Reservations List.
D-Link DIR-651 User Manual
DHCP Reservation
24