hit counter script
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Gateway
  5. AS5350 - Universal Access Server
  6. Configuration manual

Configure; Verify - Cisco AS5350 - Universal Access Server Configuration Manual

Universal gateway software configuration guide
Hide thumbs Also See for AS5350 - Universal Access Server:
Table of Contents

Advertisement

Chapter 3
Basic Configuration Using the Command-Line Interface
Command
Step 7
AS5400(config-line)# modem inout
Step 8
AS5400(config-line)# Ctrl-Z
AS5400#
Modems and lines are configured after:
•
•
Each modem is mapped to a dedicated asynchronous line inside the gateway. After the modem inout
command is applied to the lines, the gateway is ready to accept modem calls.
AAA security is applied to the lines by the aaa new-model command and aaa authentication login
default local command. AAA performs login authentication by using the local username database. The
login keyword authenticates EXEC shell users. For more information about the AAA commands, see the
"Configuring Local AAA Security" section on page
Note
The modem speed 115200 bps and hardware flow control are the default settings for integrated modems.
Resetting to Default Values for Country Codes
To reset to default settings for country codes, enter the following commands in global configuration
mode:
•

Verify

To verify your SPE configuration:
•
OL-3418-02 B0
The ISDN channels are operational
POTS telephone calls are successfully routed to the modems
no spe country—Resets to default setting.
Enter the show spe command to display a summary for all the lines:
AS5400# show spe
SPE settings:
==============
Country code configuration: default T1 (u Law)
Polling interval: 8 secs.
History log events: 50(per port)
Port legends:
============
Port state: (s)shutdown (t)test (r)recovery (d)download
(b)busiedout (p)busyout pending, (B)bad (a)active call
Call type: (m)modem (d)digital (f)fax-relay (v)voice (_)not in use
System resources summary:
======================
Total ports: 108, in use ports: 0, disabled ports: 0, free ports: 108
Total active calls: modem
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
Purpose
Enables incoming and outgoing calls.
Returns to enable mode.
3-4.
0,
voice
0,
digital
Configuring the Universal Port Card and Lines
0,
fax-relay
0
3-29
Show Quick Links

Hide quick links:

Advertisement

Table of Contents
loading

Related Manuals for Cisco AS5350 - Universal Access Server

Related Content for Cisco AS5350 - Universal Access Server

This manual is also suitable for:

As5400

Table of Contents