hit counter script

Configure; Verify - Cisco AS5350 - Universal Access Server Configuration Manual

Universal gateway software configuration guide
Hide thumbs Also See for AS5350 - Universal Access Server:
Table of Contents

Advertisement

Chapter 3
Basic Configuration Using the Command-Line Interface
Command
Step 5
AS5400(config)# service password-encryption
Step 6
AS5400(config)# service timestamps debug
datetime msec
Step 7
AS5400(config)# service timestamps log
datetime msec
Step 8
AS5400(config)# line con 0
Step 9
AS5400(config-line)# exec-timeout 0 0
Step 10
AS5400(config-line)# exit
AS5400(config)#
Note
The enable password command is obsolete. Do not use it.

Verify

To verify that you configured the right host name and passwords:
OL-3418-02 B0
Enter the show configuration command:
AS5400(config)# show configuration
Using 1888 out of 512000 bytes
!
version XX.X
.
.
!
hostname AS5400
!
enable secret 5 $1$60L4$X2JYOwoDc0.kqa1loO/w8/
.
Check the host name and encrypted password displayed near the top of the command output.
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
Configuring the Host Name, Password, and Time Stamps
Purpose
Applies password encryption.
When password encryption is enabled, the
encrypted form of the password is displayed when
a show configuration command is entered.
Note
You cannot recover a lost encrypted
password.
Enters timestamp debugging messages to include
milliseconds in the date and time stamp.
Enters timestamp logging messages to include
milliseconds in the date and time stamp.
Enters line configuration mode to configure the
console port. You are in configuration mode when
the prompt changes to
AS5350(config-line)#
AS5400(config-line)#.
Prevents the gateway's EXEC facility from timing
out if you do not type any information on the
console screen for an extended period.
Exits global configuration mode.
or
3-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

As5400

Table of Contents