hit counter script
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Gateway
  5. AS5350 - Universal Access Server
  6. Configuration manual

Appendix; Rom Monitor; Entering The Rom Monitor Program - Cisco AS5350 - Universal Access Server Configuration Manual

Universal gateway software configuration guide
Hide thumbs Also See for AS5350 - Universal Access Server:
Table of Contents

Advertisement

ROM Monitor

The information herein applies to the Cisco AS5350, Cisco AS5400, and Cisco AS5400HPX universal
Note
gateways. Note that the latter requires use of Cisco IOS release 12.2(2)XB or later.
the first software to run when the gateway is powered-up or reset. The ROM monitor can help you isolate
or rule out hardware problems encountered when installing your gateway. This appendix describes the
following:
•
•
•
•

Entering the ROM Monitor Program

The ROM monitor diagnostics help initialize the processor hardware and boot the main operating system
software. If you set the software configuration register (bits 3, 2, 1, and 0) to zero, you can start the
gateway in the standalone ROM monitor. An example of the ROM monitor prompt follows:
rommon 1 >
To enable the Break key, and to default to booting at the ROM monitor while running the system
software, reset the configuration register to 0x0 by entering configuration mode, and enter the following
configuration command:
confreg 0x0
The new configuration register value, 0x0, takes effect after the gateway is rebooted with the reload
command. If you set the configuration to 0x0, you will have to manually boot the system from the
console each time you reload the gateway.
Timesaver
Break (system interrupt) is always enabled for 60 seconds after rebooting the system, regardless of
whether break is configured to be off by setting the configuration register. During the 60-second window,
you can break to the ROM monitor prompt.
OL-3418-02 B0
Entering the ROM Monitor Program, page B-1
ROM Monitor Command Conventions, page B-2
Command Aliasing, page B-2
ROM Monitor Commands, page B-3
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
A P P E N D I X
B
-1
Show Quick Links

Hide quick links:

Advertisement

Table of Contents
loading

Related Manuals for Cisco AS5350 - Universal Access Server

Related Content for Cisco AS5350 - Universal Access Server

This manual is also suitable for:

As5400

Table of Contents