Table of Contents
Advertisement
Using the Web-Browser Interface for the First Time
Using the Web-Browser Interface for the First Time
Use the access point's IP address to browse to the management system. See the
Assigning an IP Address" section on page 3-3
point.
Follow these steps to begin using the web-browser interface:
Start the browser.
Step 1
Enter the access point's IP address in the browser Location field (Netscape Communicator) or Address
Step 2
field (Internet Explorer) and press Enter. The Summary Status page appears.
Using the Management Pages in the Web-Browser Interface
The system management pages use consistent techniques to present and save configuration information.
A navigation bar is on the left side of the page, and configuration action buttons appear at the bottom.
You use the navigation bar to browse to other management pages, and you use the configuration action
buttons to save or cancel changes to the configuration.
Note
Changes are applied only when you click Apply. It's important to remember that clicking your browser's
Back button returns you to the previous page without saving any changes you have made. Clicking
Cancel cancels any changes you made on the page and keeps you on that page.
Figure 4-1
Cisco Aironet 1100 Series Access Point Hardware Installation Guide
4-2
shows the web-browser interface home page.
Chapter 4
for instructions on assigning an IP address to the access
Using the Web-Browser Interface
"Obtaining and
OL-4309-02
Hide quick links:
Advertisement
Table of Contents
