Table of Contents
Advertisement
Rear-Panel Description
Console Port
You can connect a switch to a PC through the console port by using a RJ-45-to-DB-9 adapter cable.
If you want to connect a switch to a terminal, you need to provide an RJ-45-to-DB-25 female DTE
adapter. You can order a kit (part number ACS-DSBUASYN=) with that adapter from Cisco.
For console-port and adapter-pinout information, see the
page
Security Slots
The switches have security slots in the left and right side panels. You can install an optional cable lock,
such as the type that is used to secure a laptop computer, to secure either or both sides of the switch.
Figure 1-5
Figure 1-5
1 Security slot
Cable locks are available from most computer accessory suppliers.
Catalyst 2940 Switch Hardware Installation Guide
1-10
B-5.
shows the slot on a left-side panel.
Switch Left Panel
1
"Cable and Adapter Specifications" section on
Chapter 1
Overview
OL-6157-01
- Quick Links:
- Setting up the Switch
- Installation
Hide quick links:
Advertisement
Table of Contents
