Power Switch Assembly - HP dx2200 - Microtower PC Service & Reference Manual
Business pc 1st edition
Hide thumbs
Also See for dx2200 - Microtower PC:
- Specifications (38 pages) ,
- Hardware reference manual (31 pages) ,
- Utility manual (18 pages)
Table of Contents
Advertisement
Removal and Replacement Procedures— Microtower (MT) Chassis
6.9.1 Power Switch Assembly
1. Prepare the computer for disassembly
2. Remove the access panel and rotate the computer so the system board is parallel to the table
to make it easier to work on
3. Disconnect the braided Power/LED cables from the system board.
4. Free the braided cables from the cable tie that is attached to the chassis.
5. Squeeze the top of the switch holder 1. rotate the switch, and remove it from the chassis.
To install the power switch assembly, reverse the removal procedures.
6–18
(Section 6.1, "Preparation for
(Section 6.2, "Access
Panel").
415606-001
Disassembly").
Service Reference Guide, dx2200 MT
- Quick Links:
- System Board
Hide quick links:
Advertisement
Table of Contents
