Brother DCP-T536DW Quick Setup Manual
Hide thumbs
Also See for DCP-T536DW:
- Product safety manual (27 pages) ,
- Quick setup manual (7 pages) ,
- Product safety manual (17 pages)
Advertisement
Quick Links
EN
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
If you selected [[5-B] Set up from the control panel on the machine] in the printed Quick Setup
Guide included with the machine, go to [5-B].
Unpack the machine and
a
check the components
Remove the protective tape and the film covering
the machine.
NOTE
• The illustrations in this guide may not match your model
exactly, but the steps are the same for each model. The
above illustration is MFC-T930DW.
• Save all packing materials and the box in case you need to
ship your machine.
• We recommend using a USB 2.0 cable (Type A/B) that is no
more than 2 metres long.
• Use a straight-through Category 5 (or greater) twisted-pair
cable for 10BASE-T or 100BASE-TX Fast Ethernet Network
(not included). (DCP-T830DW / DCP-T835DW /
MFC-T930DW)
Load plain A4 paper in the
b
paper tray
Proceed to the next step according to your
model. The model name can be found on
the front of the machine.
DCP-T536DW / DCP-T730DW
DCP-T735DW
Continue to the next column
Quick Setup Guide
DCP-T536DW / DCP-T730DW / DCP-T735DW
DCP-T830DW / DCP-T835DW / MFC-T930DW
Operation Videos:
www.95105369.com
Inbox Ink
Power Cord
Bottles*4
User's
USB Cable
Guide
2-A
Installation & Using Videos
DCP-T830DW / DCP-T835DW
MFC-T930DW
2-A
1
CHN-ENG
Version 0
2-B
2
1
Advertisement
Related Manuals for Brother DCP-T536DW
Summary of Contents for Brother DCP-T536DW
- Page 1 Quick Setup Guide DCP-T536DW / DCP-T730DW / DCP-T735DW DCP-T830DW / DCP-T835DW / MFC-T930DW CHN-ENG Version 0 Operation Videos: Installation & Using Videos www.95105369.com Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
- Page 2 Connect the telephone line cord (MFC-T930DW) Follow this step only for models MFC-T930DW and if you are using this machine as a fax machine. The telephone line cord is not included in the box. Insert the telephone line cord into the socket marked LINE.
- Page 3 Set up from the control panel on the machine Follow the steps below according to your model. DCP-T536DW / DCP-T730DW / DCP-T735DW DCP-T830DW / DCP-T835DW 1. When [Set up?] is displayed, press . 2. Press to select [Set up using LCD], and then press OK.
- Page 4 Align the bottle so that the pin on the ink tank can be inserted into the hole in the bottle, as shown in Fill the ink tanks with inbox (1). Slide the bottle onto the pin at the angle shown in (2) until the cap is flush with the ink tank surface.
- Page 5 Print Quality Check Sheet: Cleaning can take a few minutes, and you can perform the next step during this time. DCP-T536DW / DCP-T730DW / DCP-T735DW DCP-T830DW / DCP-T835DW Set the date and time Press Start. Follow the steps on the LCD to set the date and MFC-T930DW time.
- Page 6 To adjust the print alignment before using your machine, print the Adjustment Sheet: Connect your computer or mobile device to your DCP-T536DW / DCP-T730DW / DCP-T735DW DCP-T830DW / DCP-T835DW machine (if needed) When the alignment check message appears, Visit the following website from your computer or press and follow the LCD instructions.
- Page 7 For wired network connection and USB connection, locate the correct port (based on the cable you are using) inside the machine, as shown. DCP-T536DW / DCP-T730DW / DCP-T735DW DCP-T830DW / DCP-T835DW 1. Go to your machine and press Wi-Fi. Setup Finished 2.
- Page 8 If you cannot find this information, ask your network administrator or wireless access point/router manufacturer. For more information, see Enter Text on Your Brother Machine in the Online User's Guide. When the wireless setup is successful, the LCD displays [Connected].