First Time Connecting To The Switch; Password Protection - D-Link DES-3526 User Manual
Layer 2 managed stackable fast ethernet switch
Hide thumbs
Also See for DES-3526:
- Command line interface reference manual (246 pages) ,
- User manual (328 pages) ,
- Manual (258 pages)
Table of Contents
Advertisement
xStack DES-3526 / DES-3526DC Layer 2 Stackable Fast Ethernet Managed Switch User Manual
First Time Connecting to the Switch
The Switch supports user-based security that can allow you to prevent unauthorized users from accessing the Switch or changing
its settings. This section tells how to log onto the Switch.
NOTE: The passwords used to access the Switch are case-sensitive; therefore, "S" is not the same
as "s."
When you first connect to the Switch, you will be presented with the first login screen.
NOTE: Press Ctrl+R to refresh the screen. This command can be used at any time to force the
console program in the Switch to refresh the console screen.
Press Enter in both the Username and Password fields. You will be given access to the command prompt DES-3526:4# shown
below:
There is no initial username or password. Leave the Username and Password fields blank.
NOTE: The first user automatically gets Administrator level privileges. It is recommended to create at
least one Admin-level user account for the Switch.
Password Protection
The DES-3526 does not have a default user name and password. One of the first tasks when settings up the Switch is to create
user accounts. If you log in using a predefined administrator-level user name, you have privileged access to the Switch's
management software.
After your initial login, define new passwords for both default user names to prevent unauthorized access to the Switch, and
record the passwords for future reference.
To create an administrator-level account for the Switch, do the following:
At the CLI login prompt, enter create account admin followed by the <user name> and press the Enter key.
•
You will be asked to provide a password. Type the <password> used for the administrator account being created and
•
press the Enter key.
You will be prompted to enter the same password again to verify it. Type the same password and press the Enter key.
•
Successful creation of the new administrator account will be verified by a Success message.
•
Figure 4- 2. Command Prompt
14
- Quick Links:
- Connecting the Switch
Hide quick links:
Advertisement
Table of Contents
