hit counter script
Download
Share
Print this page
Brother SP-1 Quick Setup Manual
  1. Manuals
  2. Brands
  3. Brother Manuals
  4. Printer
  5. SP-1
  6. Quick setup manual
Brother SP-1 Quick Setup Manual

Brother SP-1 Quick Setup Manual

Hide thumbs Also See for SP-1:
1
2
3
4

Advertisement

Available languages

Available languages

Quick Links

Download this manual
Quick Setup Guide
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
SP-1
EN
ES
1
Unpack the machine and check the components
Remove the protective tape or film covering the machine and the supplies. The components included in the box may differ depending on your country.
2
Load plain Sublimation paper in the paper tray
Pull the paper tray
Fan the paper well and load it in
completely out of the
the tray.
machine.
NOTE
Place the printing surface face down.
When loading Brother Sublimation
Paper, make sure the paper's cut
corner rests in the lower right of the
tray, as shown in the illustration.
3
Connect the power cord
5
Install the starter ink cartridges
Open the ink cartridge
cover.
6
Set the date and time
Follow the LCD instructions to set the date and time.
After setting the date and time, you can set the
Firmware Update defaults.
The latest manuals are available at the Brother support website:
https://s.brother/cm2ab/
NOTE
You can adjust the control panel angle to read the LCD more easily.
To maintain print quality, keep your machine connected
to a power source all the time so that the machine can
clean the print head periodically.
7
Check the print quality
NOTE
• Save all packing materials and the box in case you must ship your machine.
• If you use a wired connection, you must purchase the correct interface cable for
the interface you want to use.
USB Cable
Use a USB 2.0 cable (Type A/B) that is no more than 6 feet (2 meters) long.
Ethernet (Network) cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
For more information about paper handling and sizes, see the Online
User's Guide at https://s.brother/cm2ab/.
Adjust the paper guides.
4
After turning the machine on, you may need to set your country or
language (depending on your machine). If required, follow the LCD
instructions.
Quickly shake all of
the ink cartridges
horizontally 15 times as
shown, before inserting
it into the machine.
Follow the LCD
instructions, and then
press the [OK] or c.
The machine prints the
Print Quality Check
Sheet.
Slowly push the paper tray
Pull out the paper support a,
completely into the machine.
and unfold the paper support
flap b so that the printed
pages do not fall.
Select your country or language
Follow the LCD instructions to install the ink cartridges.
Close the ink cartridge cover. The machine will prepare the
ink tube system for printing.
NOTE
The first time you install the ink cartridges, the machine will use
extra ink to fill the ink delivery tubes. This is a one-time process that
enables high-quality printing.
OK
Poor
D0330U001-00
UK-ENG/SPA
Version 0
2
1
Follow the LCD
instructions to check
the quality of the four
color blocks on the
sheet, and then start
the cleaning procedure.

Advertisement

loading

Related Manuals for Brother SP-1

Summary of Contents for Brother SP-1

  • Page 1 SP-1 UK-ENG/SPA Version 0 The latest manuals are available at the Brother support website: https://s.brother/cm2ab/ Unpack the machine and check the components Remove the protective tape or film covering the machine and the supplies. The components included in the box may differ depending on your country.
  • Page 2 ■ Tips! Look in this location for more tips on creating sublimation projects! For detailed machine information and product specifications, see the Online User's Guide at https://s.brother/cm2ab/. © 2024 Brother Industries, Ltd. All rights reserved.
  • Page 3 UK-ENG/SPA obtener información sobre el procedimiento de instalación adecuado. Version 0 Los manuales más recientes están disponibles en la página web de soporte de Brother: https://s.brother/cm2ab/ Desembale el equipo y revise los componentes Quite la cinta de protección o la película que cubre el equipo y los suministros. Los componentes incluidos en la caja pueden diferir en función del país.
  • Page 4 ■ Consejos ¡Busque aquí más consejos para crear proyectos de sublimación! Para obtener más información sobre el equipo y las especificaciones del producto, © 2024 Brother Industries, Ltd. Todos los derechos reservados. consulte la Guía del usuario online en https://s.brother/cm2ab/.