Table of Contents
Advertisement
Rack Mount the Chassis
Rack Mount the Chassis
The chassis can be mounted on a 4-post or a 2-post rack.
Warning
Warning
Warning
Warning
Note
Mount Cisco 8711-32FH-M Router in a 2-Post Rack with Sliders
This section describes how to use the rack-mount kit provided with the 8711-32FH-M router, to install the
chassis into a cabinet or a 2-post 19-inch rack.
Hardware Installation Guide for Cisco 8700 Series Routers
24
Statement 1032 Lifting the Chassis
To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the handles
on modules, such as power supplies, fans, or cards. These types of handles are not designed to support the
weight of the unit.
Statement 1006 Chassis Warning for Rack-Mounting and Servicing
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to
ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the
unit in the rack.
Statement 1096 Headset Warning
High Sound Pressure—Avoid listening to high volume levels for long periods to prevent possible hearing
damage.
Statement 1098 Lifting Requirement
people are required to lift the heavy parts of the product. To prevent injury, keep your back straight and lift
with your legs, not your back.
Statement 4023 Product Usage Restrictions
This product is designed for indoor usage only. Outdoor usage is not permitted.
Unpack and Install the Chassis
Advertisement
Table of Contents
